UZIN PE 480 - Damp Proof Membrane - Two Component Epoxy DPM/ Primer
Verified by manufacturer 6 months ago
Liquid DPM - epoxy barrier coating.
Application
Suitable for use on/for:
- A DPM on cementitious and gypsum based screeds, to a maximum rising and residual moisture value of 99.9% RH*r
- As a resin binder mixed with dry sand to produce a reaction resin mortar for subfloor repairs.
- Warm water underfloor heating systems.
- For exposure to castor wheels in accordance with DIN EN 12 529.
- UZIN PE 480 can be used as a moisture barrier for areas with very high moisture content up to 99.9% RH (1 coat)*. Note: Ground-baring moisture-sensitive subfloors, e.g.calcium sulphate- or magnesia- screeds, wood, etc. must not be barrier-coated.
Extended applications:
- Hardener primer for weak, porous or cracked substrates bonding primer prior to installation with levelling compounds.
- Epoxy mortar when mixed with UZIN XS 3.2 special filler primer prior to bonding work with epoxy, PUR or silane-based adhesives.
Description
Two-component epoxy DPM and primer on absorbent and nonabsorbent substrates with very high rising and residual moisture prior to floor covering, wood flooring and tiling work. For interior and exterior use.
Features and benefits:
- UZIN PE 480 is a high-quality epoxy resin primer, that hardens, in contrast to many other epoxy resins, on wet substrates.
- Can be used as a one or two coat surface moisture membrane.
- For interior and exterior use.
- Water, chemical and frost-resistant
- Solvent-free
- Excellent covering and filling capacity
- Can be used on wet substrates
General information
Color | Blue Guidance for specification option: Comp. A. Yellow Guidance for specification option: Comp. B. Green Guidance for specification option: A/B mixed. |
Material | Epoxy |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | J30/10 Cold-applied damp-proofing J30/130 Cold-applied damp-proofing |
Product range |
Specification data - Smoothing and levelling underlay compounds
Material | Epoxy resin compound. |
Consumption (per layer applied) | 250–500 g/m². Guidance for specification option: At 20 °C and 65% relative humidity. |
Pot life | 30–45 minutes. Guidance for specification option: At 20 °C and 65% relative humidity. |
Drying time | 12–24 hours. Guidance for specification option: At 20 °C and 65% relative humidity. |
Application temperature | 15°C (at floor level). Manufacturer guidanceMinimum. |
Literature
TDS UZIN PE 480 Epoxy DPM
SMET | UZIN CA Screed Flooring Installations Brochure
SMET Floor Screed and Compounds Product Selector
SMET Professional Tiling Systems Brochure
Similar products from SMET Building Products Ltd
Sopro VS 582 – Self Levelling Filler
Streetscape Priming Slurry