MB-80 Office Internal Partition System

This internal partition double-glass walling system is designed to fabricate internal partitions in offices and other public facilities.

The system enables the use of different types of infills, transparent or obscure, with internal louvres and electrical components, and office equipment. These walls are especially suitable for buildings where high sound insulation is required.

The basic feature of this construction is its versatility in arranging office space, combined with the simplicity of execution of all the works on site.

Features and benefits:

  • Good sound insulation in office spaces – noise reduction of 50 dB, depending on the type of infill.
  • Integrated partitions with electrical fittings.
  • Different types of infill available including 4–14 mm-thick panes, 16–18 mm-thick furniture boards and gypsum plaster boards.
  • Depth and construction of the basic profiles enable installation of intra-pane louvres.
  • Can be combined with a standard, 75 mm-thick gypsum plaster boards.
  • Option to fabricate 80 and 92 mm walls.
  • Custom division of space, angle of refraction within the range 90–180°.
  • Simple fabrication and installation; direct on-site pre-fabrication an option.
  • Cables inside the wall, installation of standard power sockets.
  • Can be combined with MB-45 wall or MB-45 (centrally or flushed with the plane of the wall), with MB-45S door (flushed with the plane of the wall and with non-protruding hinges) and MB-45 OFFICE (with centrally installed leaf, flushed with the plane of the wall, plus non-protruding hinges).
  • Maximum development height: 5.5 m.

General information

Uniclass 2015

Pr_25_71_57_60 Partition panelsPrimary


K30/10 Relocatable partition system

K30/130 Relocatable partition system

Specification data - Partition panels Enhanced data

Product Reference

MB-80 Office Internal Partition System


As drawing

Product Options


Various configuration options are available; consult literature for details and insert requirements within the 'Configuration' item under 'Product properties', or alternatively, add a drawing reference of the configuration required.

Similar products from Aluprof UK