NBS Source
List your products
Description

The Mayor Tempio rainscreen system is designed for use as a decorative and protective façade over external walls of buildings. The system consists of low porosity glazed ceramic plates fixed to vertical aluminium rail supports. Mayor Tempio is available in a range of ten colours.

Features:

  • Tempio ceramic plate is an extruded through bodied porcelain, fired at 1200ºC, creating a consistent quality plate of optimum accuracy in thickness, profile and flatness.
  • Plates are glazed, protecting the façade from airborne dirt and chemicals.
  • Junctions between the tiles incorporate aluminium drainage channels to disperse rainwater from the vertical joints.
  • The drainage channels also perform a compressive function, preventing tile creep and rattling under wind loads

General information
Features

Tempio ceramic plate is an extruded through bodied porcelain, fired at 1200ºC, creating a consistent quality plate of optimum accuracy in thickness, profile and flatness

Plates are glazed, protecting the façade from airborne dirt and chemicals

Junctions between the tiles incorporate aluminium drainage channels to disperse rainwater from the vertical joints

The drainage channels also perform a compressive function, preventing tile creep and rattling under wind loads

Uniclass 2015
Ss_25_20_70_25 Drained and back-ventilated rainscreen cladding systemsPrimary
Specification data - Drained and back-ventilated rainscreen cladding systems
Product Reference

Mayor Tempio Ventilated Façades

Panel -
Height

Insert requirements, available 200-500 mm.

Panel length

Insert requirements, available 500-1600 mm.

Colour

Tempio Beige

Tempio Blanco

Tempio Borriol

Tempio Cobalto

Tempio Cotto

Tempio Gris

Tempio Marfil

Tempio Metal

Tempio Negro

Tempio Rosell

Glazed finish

Optional to RAL colour range

Accessories

Tempio Duna Blanco

Tempio Duna Cotto

Tempio Duna Negro

None

Standard product features

Type:

Drained and back ventilated.

Framing system:

  • A system of vertical aluminium carrier rails, pre-punched to suit the vertical module of the selected tiles.
  • Tiles are fixed to the aluminium carrier rails with concealed stainless steel clips (fulfilling the AISI 304 Norm).
  • The carrier rails are suitable for use on a variety of sub-structures including blockwork, timber, concrete and steel.
  • Dependent on the individual requirements of the project, insulation can be fitted within the cavity between the substructure and the rear face of the tile. Projection of the support system is dictated by the thickness of the insulation and the requirement for a minimum unimpeded ventilating cavity of 30 mm.
  • The support systems are designed to withstand stresses and loads imposed by wind, structural deflections and seismic movements, and will be tested to meet all criteria and building codes.

Rainscreen panels:

- Thickness:

24 mm.

Product Options

Accessories:

Tempio Duna decorative profiles, 300 mm high, available in three colours: Cotto/ Negro/ Blanco.

Third party certifications
  • Taylor Woodrow testing facility: CWCT test certificate N950/07 13950 : Anchor support
Similar products from Telling Architectural Ltd

© 2020 NBS Enterprises Ltd. All rights reserved.