NBS Source
List your products

This product is no longer available

MasterEmaco N 5200
Application

  • Can be applied inside and outside, on horizontal, vertical and overhead surfaces, in dry and wet environments.
  • Used for the non-structural repair of concrete elements such as balcony edges, facades, parapet walls, precast panels, stair nosings and beam edges.

Description

MasterEmaco N 5200 is a universal, single component, polymer modified, fast setting, repair, reprofiling and levelling mortar that meets the requirements of European Norm EN 1504-3 class R2.

It is a ready to use material that contains special cements, well graded sands, hydraulic binders, carefully selected polymers and fibres (polyacrylonitryl) to reduce shrinkage, plus improve the physical and application properties. Applied nanotechnology has been used to significantly reduce shrinkage.

When mixed with water, it forms a highly thixotropic mortar that can easily be hand or trowel applied in thicknesses from 3–100 mm in one layer.

Features and benefits:

  • Formulated with new nanotechnology to minimize shrinkage and crack tendency.
  • Superb application properties.
  • No slump mortar.
  • Excellent high build capacity.
  • Can be used as a fairing coat and patch repair mortar.
  • Easy to create profiles and corners without formwork.
  • Fast setting: can be over-coated in only four hours.
  • Low modulus of elasticity.
  • Low chromate (Cr[VI] < 2 ppm).
  • Does not contain chlorides and is effectively self-curing.
  • CE marked.

Applications:

  • Can be applied inside and outside, on horizontal, vertical and overhead surfaces, in dry and wet environments.
  • Used for the non-structural repair of concrete elements such as balcony edges, facades, parapet walls, precast panels, stair nosings and beam edges.

General information
Specification data - Fibre-reinforced polymer-modified cementitious mortars
Product Reference

MasterEmaco N 5200

Standard product features

Technical characteristics:

  • Chemical base: Cement.
  • Colour: Grey.
  • Grain size: 1 mm (maximum).
  • Chloride Ion content to EN 1015-17: ≤ 0.03 %.
  • Fresh mortar density: 1.9 g/cm³ (approximately).
  • Application temperature (ambient and substrate): 5–30°C.
  • Setting time: 45–75 minutes (initial), 60–120 minutes (final).
  • Compressive strength to EN 12190 after 28 days: ≥ 30 N/mm².
  • Adhesion to concrete to EN 1542 after 28 days: ≥ 1.8 N/mm².
  • Adhesion to concrete after (28 days) Freeze-Thaw (50 cycles with salt) to EN 13687-1: ≥ 1.7 N/mm².
  • Adhesion to concrete after (28 days) Thunder-Shower (50 cycles) to EN 13687-2: ≥ 1.9 N/mm².
  • Capillary absorption to EN 13057: ≤ 0.5 kg/m²h-0.5.