Verified by manufacturer 9 months ago
Quadratically shaped sun and wet weather awning protection system.The Markilux Markant is a quadratically shaped sun and wet weather awning with perforated openings for water drainage.
For domestic and commercial settings including hotels, restaurants, pubs, hospitals and offices.
Quadratically shaped sun and wet weather awning protection system – free-standing or with wall fixture to one side. The integrated single or double awning unit lends the system a unique textile character. Rainwater is drained through the specially manufactured cover into a gutter which runs down the centre of each awning.
Areas up to 3 x 6 m can be protected with one panel of fabric or 6
x 6 m with two panels.
Features and benefits:
Size (width x depth)
6000 x 3000 mm.
Larger sizes available with coupled designs.
Awning profile: extruded aluminium and powder coated. Square post profile, 125 x 125 cm. Corner joints: die-cast alumimium, covers are extruded aluminium and powder coated.
Standard. fabric range no 301.. / 309..–315.
Optional. fabric range no 370...
Standard. fabric range no 324.. / 325.. / 328../ 369..
Optional. fabric range no 374.. / 375..
fabric range no 331.. / 332..
Radio-controlled motor io, 868 MHz.
Beaufort 6 - Up to 30 mph.
Infrared heater 2500 W, dimmable in three stages with integrated radio-controlled receiver, 868 MHz io .
LED-Line all around in the frame profile.
LED-Line in the rain gutter.
LED-Spots attached to the rain gutter.
Combination with vertical blinds.
Radio-controlled dimmer io 868 MHz.
Anodised aluminium E6/EV1.
Sulphur yellow RAL 1016.
Traffic red RAL 3020.
Pitch black RAL 9005.
Yellow green RAL 6018.
Traffic purple RAL 4006.
Face fixture bracket for bracket frame profile.
Bracket frame profile.
Wall sealing profile including brush seal.
One side plate including two pan-head self-tapping screws for wall sealing profile.
KRINNER ground screw.
Frame colour/ finish
Traffic white RAL 9016.
Metallic aluminium RAL 9006.
Grey brown, similar to RAL 8019.
Off-white textured finish, 5233.
Stone grey metallic, 5215.
Anthracite metallic, 5204.
Havana brown textured finish, 5229.
The post feet can be adjusted by 120 mm in height to allow the system to be levelled
Footplates: asymmetrical footplate covers as standard, 201 x 201 mm, made of die-cast aluminium, powder coated.
Footplates: symmetrical footplate covers are available, 270 x 270 mm, made of die-cast aluminium, powder coated.
Without footplate covers.
optionally without footplate cover for installation below ground
optionally with adapter plates for Krinner screw-in foundations