Mapeguard WP Adhesive

Application

For professional use. Can be applied by brush, roller, trowel or spray. Suitable for application in wall and floor areas, and for:

  • Bonding and sealing overlaps of Mapeguard WP 200, Mapeguard WP 90 and other relevant fittings.
  • Bonding and sealing Mapeguard ST onto Mapeguard WP 200 and Mapeguard WP 90.
  • Bonding and sealing Mapeguard IC, Mapeguard EC, and Mapeguard PC.

Consult manufacturer's literature for information on recommended substrate preparation and conditions not suitable for the application of this product.

Description

Two-component, cementitious, binder based mortar adhesive for bonding and sealing.

Features and benefits:

  • Rapid drying.
  • Elastic, plastic consistency.
  • Can be used in conjunction with various Mapei products.
  • Component A complies with the conditions of Annex XVII to Regulation (EC) No 1907/2006 (REACH), Item 47 – consult manufacturer for information.

Applications:

For professional use. Can be applied by brush, roller, trowel or spray. Suitable for application in wall and floor areas, and for:

  • Bonding and sealing overlaps of Mapeguard WP 200, Mapeguard WP 90 and other relevant fittings.
  • Bonding and sealing Mapeguard ST onto Mapeguard WP 200 and Mapeguard WP 90.
  • Bonding and sealing Mapeguard IC, Mapeguard EC, and Mapeguard PC.

Consult manufacturer's literature for information on recommended substrate preparation and conditions not suitable for the application of this product.

General information

Uniclass 2015

Pr_20_31_02_12 Cementitious adhesivesPrimary

CAWS

M40/12 Mosaic to

M40/120 Mosaic to

Specification data - Cementitious adhesives

Product Reference

Mapeguard WP Adhesive

Standard product features

Technical characteristics:

– Part A:

  • Form: Powder.
  • Colour: Light brown.
  • Bulk density: 1.3 g/cm³.
  • Dry solids content: 100%.

– Part B:

  • Form: Liquid.
  • Colour: White.
  • Density: 1.04 g/cm².
  • Dry solids content: 54%.

– Mixture:

  • Form: Fluid liquid.
  • Composition: Fine-grained selected aggregates, special admixtures and synthetic polymers in water dispersion.
  • Colour: Brown.
  • Mixing ratio: 1:0.8 (part A: part B).
  • Density: 1400 kg/m².
  • Application temperature: 5–35°C.
  • Consumption: 50 mm overlap per 100 g/m; 120 mm overlap per 250 g/m.

Similar products from Mapei (UK) Ltd

Adesilex P10

Adesilex P10

Adesilex P4

Adesilex P4

Adesilex P9

Adesilex P9

Elastorapid

Elastorapid

Granirapid

Granirapid

Keraflex

Keraflex

Keraflex Maxi S1

Keraflex Maxi S1

Keraquick S1

Keraquick S1

Keraquick Ultrafast S1

Keraquick Ultrafast S1

Keraquick XL Fibrelite

Keraquick XL Fibrelite