Cable based fall arrest system.
Guided type fall arrest system using a cable attached to Constant Force® anchor posts. Provides individual protection, requiring direct action by each user to ensure they are protected.
Must be used with personal protective equipment (PPE), e.g. full body harness to BS EN 361, energy absorber to BS EN 355, and lanyard (of correct length) to BS EN 354. PPE procurement is normally the responsibility of the building owner/ user.
The level of user competency required to safely use different categories of system varies:
Note that perimeter systems generally do not give blanket coverage of a roof. If this is required, and a ridge system is deemed impractical/ unsuitable, then a series of interconnected systems must be installed, covering the full width of the roof.
Components are designed for compatibility with most roofing systems; Latchways technical literature gives specification details for the following:
Standing seam roofing systems:
Composite roofing systems:
Built up on site roofing systems:
Secret fix roofing systems:
Polymeric single ply membrane roofing systems:
Bituminous membrane roofing systems:
Latchways® systems can be retrofitted to existing buildings.
N25/10 Personal fall protection equipment
N25/210 Personal fall protection equipment
ManSafe® Constant Force® Fall Arrest System
Perimeter with fall hazards
Corner set (90°)
Transfastener (one per user)
To suit bituminous membrane roofing system
To suit built up on site roofing system
To suit composite roofing system
To suit polymeric single ply membrane roofing system
To suit secret fix roofing system
To suit standing seam roofing system
Roofing manufacturer's system reference
CF post finish
Polyester powder coated
To match roofing panels
By contractor trained and approved by Latchways
Provide written approval of system fixing method from roofing manufacturer
Provide, at entrance to system, suitable signage giving instructions for operating system and directives about use of personal protective equipment; clearly state purposes and limitations of sytem
Standard product features
Constant Force® post:
Turnbuckle, swage and clevis assemblies:
Finish to Constant Force® posts:
Polyester powder coating can be matched to roofing panels, if required.
D ring and hanger:
Attaches to intermediate CF post to form intermediate cable support.
90° Corner bracket:
One piece bracket; attaches to intermediate CF post to provide change of direction.
Attaches to intermediate CF post to provide angle change of between 0° and 80° in horizontal or vertical plane.
Required for inclined sections if roof pitch is greater than 15°.
Fall protection for telecommunications industry
Fall protection for window maintenance
Fall protection for aircraft maintenance
Fall protection systems for industrial applications
Fall Protection for Rooftop Maintenance
Self retractable lifeline for industrial maintenance
Fit for Purpose: Constant Force Post - Guided Type Fall Arrest System