NBS Source
I'm a manufacturer

Louvre Guard

Verified by manufacturer 6 months ago

Senior Architectural Systems Ltd Third party certifications:
  • UKAS

    UKAS

    Certificate type

Externally mounted louvre for aluminium windows.

Jump to:
+44 (0)1709 772600 Website

Application

Suitable for buildings where high ventilation is needed, whilst keeping occupants safe from the risk of falling from a window.

Description

An aluminium louvre which can be used with the inward opening SPW600 and PURe® window systems. Available anodized in either silver or bronze, or in any standard RAL colour.


Features and benefits:

  • The system is easy to install.
  • Consists of an external adaptor and oval shaped blades, which are fixed to the outside of an inward opening window.
  • It can be positioned horizontally or at any angle up to 45° in either direction. This means the windows can open to their maximum angle, maximizing ventilation whilst guarding those inside from the risk of falling from the window.
  • Manufactured from extruded aluminium, the system is fully recyclable and has a lifecycle of more than 40 years.
  • Fully compatible with SPW600 and PURe® inward opening windows.


It is either fixed through the face of the window or through a bespoke coupling mullion, therefore maintaining the thermal barrier. It has been fully barrier load and impact load tested and is available with a maximum blade span of 1000 mm. Barrier load tested to BS 6180 and impact load tested to BS EN 13049: Class 5.

General information

Finish

Anodized

Powder-coated

Material

Aluminium

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_30_59_48_04 Aluminium louvre panel unitsPrimary

CAWS

L10/330 Aluminium windows

L10/25 Aluminium windows

Product range

Louvre Guard

Specification data - Aluminium louvre panel units

Size (l x w x d)

Guidance for specification option:

Insert requirements: Available with a maximum blade span of 1000 mm.

Material

Aluminium.

Guidance for specification option:

  • Framing sections/ louvre blades: Extruded aluminium alloy 6060 or 6063 T6 to BS EN 755-9 or BS EN 12020-2.
  • Thermal barriers: Polyamide manufactured in accordance with PA66 GF25.

Finish

Anodized.

Polyester powder coating, RAL.

Colour

Guidance for specification option:

Insert colour requirement for powder coating. Available or in any standard RAL colour. Consult manufacturer for further information.

Construction

Constructed using louvre blades screwed to a receiver section, which is screw fixed to the relevant window outer frame/ mullion. Screw fixings are then concealed with an extruded capping section which is then finished with an injection moulded end cap.

Louvre configuration

-

Blade orientation

Horizontal.

Blade angle

-

Manufacturer guidance

Insert requirement, can be positioned horizontally or at any angle up to 45°.

Sustainability data

Country of product manufacture

United Kingdom

Recyclability

100

Third party certifications

UKAS

UKAS

ISO 14001

UKAS

UKAS

ISO 45001

UKAS

UKAS

ISO 9001

Literature

SAS Louvre Guard Technical Datasheet

SAS Louvre Guard Technical Datasheet

Introduction to Senior Architectural Systems Brochure

Introduction to Senior Architectural Systems Brochure

SAS BREEAM Brochure

SAS BREEAM Brochure

SAS CPD Seminars 2023

SAS CPD Seminars 2023

SAS Featured Projects Brochure

SAS Featured Projects Brochure

SAS Accommodation Brochure

SAS Accommodation Brochure

SAS Commercial Brochure

SAS Commercial Brochure

SAS Education Brochure

SAS Education Brochure

Case studies

Potterrow Student Accommodation

Potterrow Student Accommodation