Two component polyester anchoring grout supplied in pre-measured quantities. The material cures quickly to give consistent, high performance anchorages and conforms to the requirements of BS EN 1504-6. It is used for the anchoring of steel bars into concrete, brickwork, masonry and rock.


  • Can be placed underwater.
  • Corrosion resistant.
  • Easy to mix and apply.
  • Non-expansive.
  • Rapid strength gain.
  • Two grades specifically for vertical and horizontal/ overhead use.
  • Vibration resistant.

General information


Can be placed underwater

Corrosion resistant

Easy to mix and apply


Rapid strength gain

Show more

Uniclass 2015

Pr_20_31_53_52 Metal anchor and fixings groutsPrimary


C30/460 Bonded anchors

C51/540 Resin grout/ adhesive

E11/540 Bonded anchors for fixings to

G10/447 Bonded anchors

G20/715 Bonded anchors

Show more
Specification data - Metal anchor and fixings grouts

Product Reference




For horizontal and overhead holes.


For vertical downwards holes.

Standard product features

Technical properties:

  • Chloride ion content: 0.00%.
  • Compressive strength (to BS EN 12190): 100 MPa (28 days).
  • Flexural strength (to BS 6319-3): 19 MPa (P25, 28 days), 20 MPa (S25, 28 days).
  • Reaction to fire: Class B s1 d0.
  • Tensile strength (to BS 6319-7): 11 MPa (28 days).

Product Options


- P25:

Thixotropic grade, 25 minute gel at 20°C. For use in overhead or horizontal holes where the hole is up to 25 mm greater in diameter than the bar.

- S25:

Pourable grade, 25 minute gel time at 20°C. For use in vertical down holes where the hole is 8–40 mm greater in diameter than the bar.