NBS Source
List your products
Description

Ventilated rainscreen system with glass panels laminated to lightweight aerated clay concrete panels. The system is mounted on an aluminium support system using concealed mechanical fixings, panels can also be structurally bonded.

Features:

  • Robust composite panels up to 32 mm thick, consisting of toughened safety glass bonded to a lightweight aerated concrete base.
  • Panels are available in heights up to 3600 mm and 1200 mm in width.
  • Available with graffiti-resistant coating.
  • Highly resistant to impact.
  • Tested to CWCT standards at the Taylor Woodrow laboratories to ensure that the glass does not de-bond from the panel on impact.
  • Fixed with either a concealed clip system or structural adhesive to a lightweight aluminium carrier system.

General information
Finish

Safety glass.

Features

Robust composite panels up to 32 mm thick, consisting of toughened safety glass bonded to a lightweight aerated concrete base

Panels are available in heights up to 3600 mm and 1200 mm in width

Available with graffiti-resistant coating

Highly resistant to impact

Tested to CWCT standards at the Taylor Woodrow laboratories to ensure that the glass does not de-bond from the panel on impact

Fixed with either a concealed clip system or structural adhesive to a lightweight aluminium carrier system

Uniclass 2015 Drained and back-ventilated rainscreen cladding systems (Ss_25_20_70_25)
Specification data
Product Reference

Airtec Glass Facades

Size (h x l)

3200 mm x 1400 mm

Finish

Safety glass.

Fixing

Concealed clips

Structurally bonded

Standard product features

Performance:

  • Board size (maximum): 3000 x 1200 mm.
  • Thickness (nominal): 25–29 mm.
  • Bending strength (mean/ minimum values): >740/ >680 Nm/m.
  • Flexural strength (minimum): 4.5 N/mm².
  • Wind load: 2.4 Kn/m².
  • Joint width (minimum): 6 mm.
  • Height (maximum): 100 m (restrictions apply to panel sizes and fixing configurations).
  • Support centres (maximum): 1250 mm vertical, 1200 mm horizontally.
  • Impact test: 500 Nm - soft body, 10 Nm - hard body. Glass shattered but no delamination.

Product Options

Finish:

Available in an extensive range of UV resistant colours - refer to manufacturer for further details.

Literature
Similar products from Telling Architectural Ltd

© 2020 NBS Enterprises Ltd. All rights reserved.