LimeBonded Decorative Surfacing System
Application

Suitable for asphalt and concrete substrates. Highways, car parks, driveways and pathways.

Description

LimeBonded Decorative Surfacing (LimeBonded High Friction Surfacing) is a high-performance, flexible, polyurethane-based anti-slip/ anti-skid system for installation onto asphalt and concrete substrates. LimeBonded systems are ideal for all Type 1 Roads (LimeBonded High Friction Surfacing), cycle paths, walkways, drives and pathways (LimeBonded Decorative Surfacing).

The benefits of these systems are that they provide an anti-slip/ anti-skid surface for up to ten years.

It is also fast-curing, has an excellent wear performance, no odour, is non-flammable and is resistant to oil, diesel and petrol.

Resin and aggregate:

LimeBonded systems use an aromatic formulation that provides a strong, bonded finish. The performance and appearance of the finished surface are dependent on the aggregates used. The LimeBonded aggregates recommended have been selected for their strength and decorative appearance. The aggregates are high-performing and available in a variety of colours. When selecting for roads and high-traffic areas where high-friction surfacing is required, it is always advised to use bauxite aggregates.

Appearance can be affected by the size of selected aggregates; for example, when using a larger aggregate such as a 2–5 mm, the open appearance will show the base resin grinning through.

Features and benefits:

  • Up to ten years of performance.
  • Fast-curing.
  • Excellent wear.
  • Anti-slip/ anti-skid.
  • No odour.
  • Non-flammable.
  • Resistant to oil, diesel and petrol.
  • Optimized ratios of resin to aggregate sizes.
  • Foot traffic after 24 hours at 20°C.
  • Natural aggregates are available.
  • All aggregates selected to reduce the chances of rust appearing.
  • Low maintenance.
  • In excess of 500 m² can be installed per day.

Application:

Suitable for asphalt and concrete substrates. Highways, car parks, driveways and pathways.

General information

Features

Up to ten years of performance

Fast-curing

Excellent wear

Anti-slip/ anti-skid

No odour

Show more

Material

Resin and aggregate

Uniclass 2015

Ss_30_14_02_70 Resin-bonded aggregate paving systemsPrimary

CAWS

Q23/221 Proprietary fibre reinforced bonded chippings overlay

Specification data - Resin-bonded aggregate paving systems Enhanced data

Product Reference

LimeBonded Decorative Surfacing System (LimeBonded High Friction Surfacing)

Geotextile below granular sub-base

Not required

Required

Granular sub-base

125/150 mm minimum well compacted Type 1 granular sub-base or similar approved

Binder course

AC14 dense asphalt concrete (macadam) to BS EN 13108-1

Surface course

-

Binder

1.5–2 mm of polyurethane (PU) resin

Chippings

Select mix blend as required; consult manufacturer for details.

Edge restraints

Optional

Standard product features

Colour:

Various. Refer to manufacture colour sheets.

Features:

  • Up to ten years of performance.
  • Fast-curing.
  • Excellent wear.
  • Anti-slip/ anti-skid.
  • No odour.
  • Non-flammable.

Material:

Resin and aggregate.

Country of origin:

United Kingdom.

Third party certifications
  • HAPAS