QA Certificate
Certificate type
Decorative resin bonded surfacing.
Suitable for asphalt and concrete substrates. Highways, car parks, driveways and pathways.
LimeBonded Decorative Surfacing (LimeBonded High Friction Surfacing) is a high-performance, flexible, polyurethane-based anti-slip/ anti-skid system for installation onto asphalt and concrete substrates. LimeBonded systems are ideal for all Type 1 Roads (LimeBonded High Friction Surfacing), cycle paths, walkways, drives and pathways (LimeBonded Decorative Surfacing).
The benefits of these systems are that they provide an anti-slip/ anti-skid surface for up to ten years.
It is also fast-curing, has an excellent wear performance, no odour, is non-flammable and is resistant to oil, diesel and petrol.
Resin and aggregate:
LimeBonded systems use an aromatic formulation that provides a strong, bonded finish. The performance and appearance of the finished surface are dependent on the aggregates used. The LimeBonded aggregates recommended have been selected for their strength and decorative appearance. The aggregates are high-performing and available in a variety of colours. When selecting for roads and high-traffic areas where high-friction surfacing is required, it is always advised to use bauxite aggregates.
Appearance can be affected by the size of selected aggregates; for example, when using a larger aggregate such as a 2–5 mm, the open appearance will show the base resin grinning through.
Features and benefits:
Application:
Suitable for asphalt and concrete substrates. Highways, car parks, driveways and pathways.
Features | Up to ten years of performance Fast-curing Excellent wear Anti-slip/ anti-skid No odour Non-flammable |
Material | Resin and aggregate |
Uniclass 2015 | |
CAWS | Q23/221 Proprietary fibre reinforced bonded chippings overlay |
Product Reference | LimeBonded Decorative Surfacing System (LimeBonded High Friction Surfacing) |
Geotextile below granular sub-base | Not requiredRequired |
Granular sub-base | 125/150 mm minimum well compacted Type 1 granular sub-base or similar approved |
Binder course | AC14 dense asphalt concrete (macadam) to BS EN 13108-1 |
Surface course | - |
Binder | 1.5–2 mm of polyurethane (PU) resin |
Chippings | Select mix blend as required; consult manufacturer for details. |
Edge restraints | Optional |
Standard product features | Colour: Various. Refer to manufacture colour sheets. Features:
Material: Resin and aggregate. Country of origin: United Kingdom. |