NBS Source
I'm a manufacturer

Licata Therm Mineral Wool Steel Frame EWI

Verified by manufacturer 28 days ago

Licata Building Systems Ltd

Mineral wool EWI system with choice of brick slips or a coloured render for the decorative finish.

Jump to:
+44 (0) 02088 943372 Website

Application

Suitable for new builds and refurbishment for steel frame substrates.

Description

The Licatatherm mineral wool EWI system has increased strength and crack resistance, due to the glass fibre mesh. Choose from brick slips or a coloured render for the decorative finish. EWI systems help improve the appearance and thermal efficiency of properties, reducing overall energy consumption.


Features and benefits:


  • Over 700 colour options.
  • Weather resistant.
  • Energy carbon saving. 
  • Breathable.
  • Protects against algae and mould.
  • Fully fire compliant.


Durability:


  • This system has an assessed anticipated lifespan in excess of thirty years.


Movement joints:


  • Where movement joints are present in the existing substrate, it is highly recommended that they are carried through the system. Please consult with the manufacturer for further details on where movement joints are required.


Design considerations:


  • Should the proposed project incorporate any unique design elements or curved elevations, please contact the manufacturer for recommendations or assistance.



INSTALLATION


Installer:

The system manufacturer or a contractor approved by the system manufacturer. Installation shall be made strictly in accordance with Licata Building Systems Ltd instructions. Reference should be made to the project specification, method statement, drawings and all other relevant literature. Consult with LBS Ltd for latest literature and technical bulletins


FINISHES


Primer:

Apply the Isolante LG Primer with a roller or brush to the dry base coat in an even pattern. Where possible always use the colour Primer to match the specified Topcoat finish. Allow to dry for a minimum of 12 hours.


Licata Silicone Render:

Thin coat is a ready mixed top coat for external use, highly breathable, high water resistance and excellent mechanical strength. Silicone render provides a high resistance to algae, fungi, mould and to atmospheric agents. The careful choice of acrylic binders and silicone, ensures good durability and a gloss finish with pearlescent effect to the water drops. Licata Silicone Render is suitable as a decorative finish in all work requiring high permeability to water vapour.


Siloxan Color:

A coating made with water-dispersed siloxane binder paste, ready for use and which can be pigmented. Siloxan Color is specifically designed for work on new or existing facades, as well as for the decorative phase of reinforced skim coating, and in LicataTherm external solid insulation. Owing to its formula, Siloxan Color provides complete protection for the facade against rain and atmospheric agents. The special additives contained in the formula guarantees excellent protection against algal and mould growth.



Brick Slips:

The brick slip systems can be used across a range of different applications and substrates. Suitable for internal and external application on both new build or refurbishment projects. The brick slip systems are durable and weather-resistant with a 10-year guarantee if installed by a Licata approved applicator. A choice of acrylic or clay brick slips is available. 



  • Acrylic Brick Slips: provide the traditional appearance of a brick finished building but with technology of a lightweight acrylic or mineral brick slip finish. Acrylic Brickslips are a suitable finish for external wall insulation systems used on new build or renovation of old buildings. It can also be used with timber-metal frame or modular where speed and weight are important in designs but traditional brick slips would not be recommended.
  • Licata Clay Slips: are a versatile thin brick cladding that simulates the look of traditional clay brickwork whilst providing greater insulation and more flexibility of style and application.

General information

Color

Clear

Beige

Black

Blue

Brown

Show more

Manufacturer guidance

Render finishes are available in over 700 colours and shades and also most RAL and NCS colours.

Finish

Smooth

Natural

Material

Brick

Acrylic

Clay

Mineral wool

Steel

Show more

Shape

Rectangle

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Ten year

25 year

Manufacturer guidance

If installed by an approved Licata installer, both 10 and 25 year material warranties are available, depending on the project requirements and detailing.

25 year warranties can be under written to meet the requirements of EWI energy saving grants.

Uniclass

Ss_25_45_72_28 External wall insulation systemsPrimary

CAWS

M21/20 External wall insulation system . . . . . .

M21/210 External wall insulation system

Product range

Licata External Wall Insulation

Specification data - External wall insulation systems

System performance

Thermal performance

Preparation

Surfaces must be sound, free from loose material and clean.

Support rails and brackets

-

Fixing method

-

Material

Steel Frame.

Boards

-

Material

A1 Fibre cement board.

Guidance for specification option:

For steel and timber framed substrates.

Fixings

Adhesive and mechanical.

Self-drilling screws.

Manufacturer guidance

All fixings are based upon Etag and BBA certification and the manufacturers products are designed and tested to fully comply with current required certifications and testing.

Insulation

-

Material

MW Dual Density 036.

Guidance for specification option:

Dual density mineral wool slabs available in sizes up to 1200 x 600 mm and in a range of thicknesses from 40–240 mm, with nominal densities of 160/100 kg/m³ (outer/inner layer), a minimum compressive strength of 10 kPa and a tensile resistance perpendicular to the faces of 10 kPa. Slabs are manufactured to comply with BS EN 13162:2012. 

Adhesive

Raso Top 800 Grey.

Guidance for specification option:

Cement-based powder requiring the addition of 5.25 litres of clean water per 25 kg bag.

Raso Top 800 White.

Guidance for specification option:

Cement-based elastic fibre-reinforced powder requiring the addition of 6 litres of clean water per 25 kg bag. Applied to a thickness of 5 mm.

Additional mechanical fixings

EJOT Dabo® SW8R 4.8 screws, EJOT® SBH T 65/25 washers.

Manufacturer guidance

Designed and tested to meet the current wind load and suction requirements, the system is adhesively fixed with supplementary fixings in accordance with BS EN 1991-1-4:2005. Special consideration should be given to locations with high wind-load pressure coefficients, as additional fixings may be necessary. It is recommended that a load factor of 1.5 is used to determine the ultimate wind load, in accordance with BS EN 1990:2002.

Fire barriers and stops

-

Material

1000 x 200 mm rock fibre panels.

Fire breaks.

Fixings

Adhesively fixed.

Beads and trims

Licata meshed corner beads.

PVC stop bead.

Movement joints

-

Form with

Low modulus silicone mastic.

Sealant

Compression band.

Accessories

Backing strips.

Joint filler.

Render carrier or reinforcement

-

Material

LicataTherm Ret01-1160, glass fibre mesh.

Guidance for specification option:

1 m wide mesh (3.5 x 4.5 mm grid size) of multi-strength glass fibre, with a polymer coating and nominal weight of 145 g/m².

LicataTherm Tolantext 41-112, glass fibre mesh.

Guidance for specification option:

1 m wide mesh (3.5 x 4.7 mm grid size) of multi-strength glass fibre, with a polymer coating and nominal weight of 150 g/m².

Mesh size

160g/m2.

Fixings

Adhesively fixed.

Render

-

Application

Primer coat.

Material

Isolante LG Primer.

Aggrappante LG Primer.

Decorative finish

Siloxan Color finishing coat.

Guidance for specification option:

Ready to use paste, silicone-based finishing coat with thickness regulated by the particle size, Available in 0.7, 1, 1.2, 1.5 and 2.0 mm particle sizes; insert requirements.

Lerici finishing coat.

Guidance for specification option:

Ready to use paste, acrylic-based finishing coat with thickness regulated by the particle size. Available in 0.7, 1, 1.2, 1.5 and 2.0 mm particle sizes; insert requirements.

LicataSil finishing coat.

Guidance for specification option:

LicataSil is a mineral coating made with water-dispersed potassium silicate paste, ready for use and which can be pigmented. Available in 0.7, 1, 1.2, 1.5 and 2.0 mm particle sizes; insert requirements.

Acrylic brick slips.

Guidance for specification option:

Acrylic Brick Slips: provide the traditional appearance of a brick finished building but with technology of a lightweight acrylic or mineral brick slip finish. Acrylic Brickslips are a suitable finish for external wall insulation systems avaible in 3 mm size.

Clay brick slips.

Guidance for specification option:

Licata Clay Slips: are a versatile thin brick cladding that simulates the look of traditional clay brickwork whilst providing greater insulation and more flexibility of style and application., Avaible in 10mm, 15mm, 20mm sizes; insert requirements.

Colour

-

Manufacturer guidance

  • Over 700 render colours available.
  • Acrylic and clay brick slips available on a wide range of colours and textures.
  • Consult manufacturer and insert requirement.

System accessories

Licata movement beads.

APU with mesh 9mm.

Compression band.

Samples required

Submit samples of Licata Topcoat finishes for approval. Keep approved samples on-site for the duration of the contract for inspection and comparison purposes.

Execution

Preparation work to existing substrate

Installing insulation boards

Installing fire barriers and fire-stopping

Installing movement joints

Fixing beads and trims

Installing render carrier or reinforcement

Applying render

Applied decorative finish – dragged texture

System completion

Inspection of completed installation

Sustainability data

Contains Red List materials

No

Country of material origin

Italy

Country of product manufacture

Italy

Guidance for specification option:

Render materials.

Insulation boards: UK and Germany.

Recyclability

100%

Literature

Licata Therm Mineral Wool Steel Frame Render EWI System

Licata Therm Mineral Wool Steel Frame Render EWI System

Licata Therm Mineral Wool Steel Frame Brick-Slips EWI System

Licata Therm Mineral Wool Steel Frame Brick-Slips EWI System

2. Licata Render Systems Brochure

2. Licata Render Systems Brochure

3. Licata Acrylic Brick Slips Brochure

3. Licata Acrylic Brick Slips Brochure

4. Licata Clay Brick Slips Brochure

4. Licata Clay Brick Slips Brochure

5. Licata Cement Board Brochure

5. Licata Cement Board Brochure

Similar products from Licata Building Systems Ltd

Licata Therm K5 EWI

Licata Therm K5 EWI

Licata Therm Mineral Wool Brick/ Block Work EWI

Licata Therm Mineral Wool Brick/ Block Work EWI

Licata Therm Mineral Wool Timber Frame EWI

Licata Therm Mineral Wool Timber Frame EWI

LicataTherm Bio

LicataTherm Bio

LicataTherm Graphite

LicataTherm Graphite