NBS Source
I'm a manufacturer
Compare variants

KTV 3 Direct Drive - Manual

Verified by manufacturer 2 months ago

Framed turnstile

dormakaba UK Ltd Variant:

Manual three wing revolving door.

Jump to:
+44 (0)1462 477600 Website

Description

KTV 3 revolving door with a rigid three-wing turnstile. Upper door drive KT FLEX Direct, installed between upper and lower ceiling, gearless and low-wear direct drive without drive belts or sprockets with electromagnetic operating principle, ceiling height in the base version just 100 mm, functional manual door, door can be upgraded with functional modules ranging from positioning or servo features up to creating fully automatic door with microprocessor controller using modular features.


Manufactured and TÜV type approval in accordance with DIN 18650-1, -2; machine guideline 2006/42/EC; the guidelines for power-operated windows, doors, and gates, ASR A1.7; EN ISO 13849-1; low-voltage guideline 2006/95/EC with EN 60335-1, each in their newest versions.


Features and benefits:

  • Easy installation and rapid commissioning.
  • State-of-the-art design and compliance with regulations.
  • Helps with optimization of the building energy balance.
  • Provides efficient noise protection.
  • Tailored integrated application combining industrial engineering precision and assured quality.
  • Glazed drum walls or with metal panelling.
  • Additional curved sliding doors in front of the entrance to act as night shields.
  • Manual operation with or without speed limiter.
  • Accessories that ensure compliance with the require­ments of DIN 18650 and EN 16005 and a variety of other accessories and options.
  • Traffic capacity varies depending on internal diameter size, consult technical literature for details.

General information

Material

Aluminium

Glass

Width

-

Manufacturer guidance

Internal diameter: 2000–3800 mm (all dimensions possible in-between).

Height

-

Manufacturer guidance

  • Clear passage height: 2100–4000 mm.
  • Canopy height: 17.5–700 mm.
  • Total height: Clear passage height + canopy height.

Uniclass

Pr_30_59_24_50 Manual revolving doorsetsPrimary

CAWS

L20/55 Doorsets

L20/500 Manual revolving doors

Specification data - Manual revolving doorsets

Configuration

Design with pivot-mounted wings (book fold).

Guidance for specification option:

The three pivot-mounted wings (book fold) option is in accordance with AutSchR (Automatic Sliding Doors on Escape and Rescue Routes):1997, suitable for use in emergency routes when in escape position (when unlocked).

Rigid turnstile.

Rigid turnstile, with one leaf foldable.

Guidance for specification option:

For transportation and ventilation purposes.

Materials and finishes

-

Doors

RAL colour.

Guidance for specification option:

Insert requirements.

Stainless steel 1.4301 grade, grain 240.

Silver colour, anodized E6/C0.

Special colour.

Guidance for specification option:

Insert requirements.

Drum walls

Extruded aluminium profiles with laminated safety glass 8.76 mm clear.

Extruded aluminium profiles with aluminium paneling.

Guidance for specification option:

2 x 2 mm aluminium sheet with interior insulation.

Manufacturer guidance

Circular curved drum walls made of extruded aluminium profiles. 70 x 46 mm entrance posts to mount the operating elements. Top and bottom profiles with 100 x 26 mm visible width. Sidewalls prepared for attachment to the building facade 24 mm thick.

Glazing

-

Type

8 mm laminated safety glass.

10 mm laminated safety glass.

6 mm toughened safety glass.

8 mm toughened safety glass.

10 mm toughened safety glass.

Locking mechanism

None.

With mechanical rod locking mechanism, locking rod in wing, locking plate in lower ceiling.

With manual floor-locking device for on-site profile half-cylinders.

Accessories

None.

Bolt contact (potential-free).

Button (symbol: wheelchair) inside and outside.

Guidance for specification option:

To reduce the door speed to approx. 2 RPM for one door revolution.

Door status and locking notification.

Emergency power supply UPS.

Guidance for specification option:

Not suitable for escape routes.

Error message to building control system.

Four pieces push handles OGRO TG 9355, D 32 mm mounted horizontally on entire door wing width.

Four pieces push handles OGRO TG 9355, D 40 mm mounted vertically on entire door wing height.

Four pieces push handles OGRO TG 9356, D 32 mm mounted vertically on door wing; length: 350 mm.

Isolation stainless steel sheet 360° for floor ring.

Night bank function.

Night shield

Not required.

Manual, internal, framed glass.

Guidance for specification option:

Made of circular curved extruded aluminium profile with laminated safety glass filling 8.76 mm clear. 70 x 46 mm entrance posts. Top and bottom profiles with 100 mm visible width. Locking device using manual bar lock on top and bottom set up for on-site profile half-cylinder.

Manual, internal, metal paneling.

Guidance for specification option:

Made of circular curved extruded aluminium profile and 18 mm thick panel filling of 2 x 2 mm aluminium sheet with insulation between panels. 70 x 46 mm entrance posts. Top and bottom profiles with 100 mm visible width. Locking device using manual bar lock.

Manual, external, framed glass.

Guidance for specification option:

Made of circular curved extruded aluminium profile with laminated safety glass filling 8.76 mm. 70 x 46 mm entrance posts. Top and bottom profiles with 100 mm visible width. Locking device using manual bar lock on top and bottom set up for on-site profile half-cylinder.

Manual, external, metal paneling.

Guidance for specification option:

Made of circular curved extruded aluminium profile and 18 mm thick panel filling of 2 x 2 mm aluminium sheet with insulation between panels. 70 x 46 mm entrance posts. Top and bottom profiles with 100 mm visible width. Locking device using manual bar lock on top and bottom set up for on-site profile half-cylinder.

Show more

Floor ring

Not required.

Guidance for specification option:

Installation on finished floor.

With floor ring.

Guidance for specification option:

Stainless steel angle 40 x 40 x 4, 360°, with adjustable base structure 80–250 mm – Underfloor 230 mm (SSL - FFL).

Type 0.

Guidance for specification option:

Floor ring without clamping flange to attach an on-site floor sealing.

Type 1.

Guidance for specification option:

Floor ring with axial clamping flange to attach an on-site floor sealing.

Type 2.

Guidance for specification option:

Floor ring with 180° exterior clamping flange to attach an on-site floor sealing.

Show more

Manufacturer guidance

Floor ring serves simultaneously to attach the floor finish. Sealing work required for the building structure must be performed by an on-site specialist company. The empty space between structural slab level (SSL) and lower-edge of the finished floor must be filled in with floor screed on-site.

Floor finish

On-site floor finish (30 mm thick, maximum).

Floor mat made by EMCO, Type Diplomat 522/3R, anthracite colour.

Floor mat made by EMCO, Type Diplomat 522/3G, black colour.

Floor mat made by ARWEI, Type 020/72N, anthracite colour.

Floor mat made by ARWEI, Type 020/72G, black colour.

Facade connection

On-site.

Panel in centre axle, three-sided, 24 mm thick, maximum 100 mm wide.

Special design.

Lighting

Four recessed LED spotlights.

Eight recessed LED spotlights.

Warm-air curtain

Electric floor-mounted device.

Guidance for specification option:

Colour-matched to the system. Set up for on-site electrical connection.

Electric warm-air curtain.

Guidance for specification option:

To go on top of upper ceiling with exhaust duct in the radius of the system in the interior entrance area. Surface exhaust duct colour-matched to the system. Warm-air curtain set up for on-site electrical connection.

Floor-mounted device.

Guidance for specification option:

Colour-matched to the system. Warm-air curtain set up for on-site hot-water connection.

Warm-air curtain.

Guidance for specification option:

To go on top of upper ceiling with exhaust duct in the radius of the system in the interior entrance area. Surface exhaust duct colour-matched to the system. Warm-air curtain set up for on-site hot-water connection PWW 70/50°C.

Ramming protection

None.

Glass separating.

Not glass separating.

Ramming protection: Side-wall glazing with 84 mm wide ramming protection made of aluminium sheet colour-matched to the system.

Side-wall glazing with 200 mm wide ramming protection made of aluminium sheet colour-matched to the system.

Show more

Dimensions

As drawing.

Guidance for specification option:

Insert reference.

Manufacturer guidance

  • Internal diameter: 2000–3800 mm (all dimensions possible in-between).
  • Clear passage height: 2100–4000 mm.
  • Canopy height: 17.5–700 mm.
  • Total height: Clear passage height + canopy height.

Upper ceiling interior

With particleboard dust cover, melamine-coated white.

With optical sheet metal cover, colour-matched to the system.

Upper ceiling exterior

Upper ceiling exterior rain-proof prepared with aluminium clamping flange to mount an on-site foil.

Upper ceiling exterior rain-proof with cover panel colour-matched to the system and additional ceiling edge profile to mount two piece stainless steel water spouts.

Guidance for specification option:

Internal diameter of 3200 mm, max.

Upper ceiling exterior with particleboard dust cover, melamine-coated white.

Upper ceiling exterior with optical sheet metal cover, colour-matched to the system.

Lower ceiling

Lower ceiling made of aluminium base structure with inlaid 8 mm particleboard melamine-white

Lower ceiling made of aluminium base structure with inlaid 2 mm aluminium sheet, surface finish___

Guidance for specification option:

Colour-matched to the system or freely selectable.

Manufacturer guidance

Segmented into eight removable ceiling panels.

Door controller

KTV-M - Manual. With standard electronic speed limitation (S) for manual door operation.

Guidance for specification option:

The turnstile on the door system can only be set in motion via manual operation and accelerates gently to walking speed.

Frame

80 x 60 mm aluminium specialized frame profiles with horizontal and vertical brush seals.

BIM objects

Platform Compatible Version
Revit
-

1

Literature

DORMA KTC-3 KTC-4 - Revolving Doors Comfortline

DORMA KTC-3 KTC-4 - Revolving Doors Comfortline

Similar products from dormakaba UK Ltd

KTV 4 Direct Drive - Manual

KTV 4 Direct Drive - Manual