KS600-1000 QuadCore™ Evolution Recess
Compare variants

Application

Suitable to be laid horizontally or vertically.

Description

Secret-fix steel-faced, QuadCore™ insulated wall panel system.


KS600-1000 Quadcore Evolution Recess is a smooth insulated panel system, that gives the high end aesthetics of a rainscreen facade with the benefits of an insulated panel. The perfect solution to achieve a minimalist facade on buildings with large flat surface areas.


Features and benefits:

  • Panels are immune to attack from mould, fungi, mildew and vermin.
  • No urea-formaldehyde is used in the construction.
  • Panels are not deleterious.
  • An air leakage rate of 3 m³/hr/m² at 50 Pa or less can be achieved when the full building envelope is constructed using Kingspan panels.
  • Cover width: 600, 900 or 1000 mm.
  • Daylighting solutions available.


Profiles:

KS600-1000 Quadcore Evolution Recess features depth and dimension through the folding of the panel edge and the insertion of a 10 mm or 20 mm gasket between the panels, creating an exclusive 3D effect.


Approvals:

CE marked to BS EN 14509: 2013.

- Fire:

  • Reaction to fire classification according to BS EN 13501–1:2007+A1:2009: B-s1,d0.
  • Class 1 surface spread of flame to BS 476 Part 6: 2009 and Part 7: 1997 (Previously known as Class 0 as defined by the Building Regulations).


Side rails and platforms supports:

Framed structure to be specified separately to include the following as required:

  • Multibeam eaves beams.
  • Multibeam side rails.
  • Multichannel side rails.
  • Multichannel trimmers.
  • Multichannel structural partitions


Warranties:

Kingspan IQ Panel Warranty covering the structural and thermal performance for a period of up to 40 years and Kingspan Coating Warranty for a period of up to 40 years (subject to project specific information).

General information

Finish

Smooth

With grooves.

Material

Steel

QuadCore

Shape

Rectangular

WarrantyDescription

40 years

Kingspan IQ Panel Warranty covering the structural and thermal performance for a period of up to 40 years and Kingspan Coating Warranty for a period of up to 40 years (subject to project specific information).

Uniclass 2015

Ss_25_20_14_54 Metal insulating sandwich panel cladding systemsPrimary

CAWS

H43/10 Metal insulating sandwich panel

H43/120 Metal insulating sandwich panel

Specification data - Metal insulating sandwich panel cladding systems Enhanced data

Cladding panels

-

Panel type

Insulation core: HCFC-, CFC- and HFC-free QuadCore hybrid insulation technology.


Material:

  • External: Steel, 0.63 mm thick.
  • Internal: Steel, 0.4 mm thick.


Single figure weighted sound reduction index (Rw): 24 dB.

Steel/ QuadCore™ insulated sandwich panels, 0.13 W/m²K.

Core thickness: 140 mm.

Weight: 15.2 kg/m².

Panel fasteners

Consult manufacturer for details and installation instructions, and insert requirements.

  • Type: High threaded screws with bonded washers; consult manufacturer for details.
  • Number/ location: Minimum requirements are one fastener through the male joint at each panel end into the vertical rail location, and two at each intermediate support position.


Additional fasteners may be required depending on wind loading.

-

Side laps sealing

Factory-applied side joint seals.

Apply non-setting gun-grade butyl sealant, butyl rubber tape sealant and silicone sealant as manufacturer's installation instructions.


A VJ1 EPDM bubble gasket, applied to the vertical steel member, is required at every vertical panel joint detail to provide an air seal.

Not required.

End laps sealing

Low-profile screws (for attaching drip flashing).

Not required.

End lap stitching fasteners

Low-profile screws (for attaching drip flashing).

Not required.

Continuity thermal insulation

Kingspan LPCB or FM Approved PIR board insulation to be installed in certain details to ensure thermal continuity.

Fill any gaps with fire-rated canister insulation.

Consult with manufacturer for further details.

System accessories

Consult manufacturer and insert requirements.

-

Product Reference

KS600-1000 QuadCore™ Evolution Recess

Design

Insert drawing reference or similar.


Length:

  • Standard lengths: 1.8–14.5 m, or insert drawing reference.
  • Non-standard lengths of 14.5–29.3 m or <1.8 m are available on request; consult manufacturer for details.

Similar products from Kingspan Insulated Panels

KS1000 CW Insulated Wall Panel System – PIR

KS1000 CW Insulated Wall Panel System – PIR

KS1000 EP (EnergiPanel) Insulated Wall Panel System – PIR

KS1000 EP (EnergiPanel) Insulated Wall Panel System – PIR

KS1000 FC Insulated Wall Panel System – PIR

KS1000 FC Insulated Wall Panel System – PIR

KS1000 LV Insulated Architectural Wall Panel System – PIR

KS1000 LV Insulated Architectural Wall Panel System – PIR

KS1000 RW Insulated Wall Panel System – QuadCore™

KS1000 RW Insulated Wall Panel System – QuadCore™

KS600-1000 AWP Insulated Wall Panel System – QuadCore™

KS600-1000 AWP Insulated Wall Panel System – QuadCore™

KS600-1000 QuadCore™ Evolution Axis

KS600-1000 QuadCore™ Evolution Axis

KS900-1000 QuadCore™ Evolution Multi-Groove

KS900-1000 QuadCore™ Evolution Multi-Groove