NBS Source
List your products
Application

For saturation and pressureless injection, for creating subsequent horizontal waterproofing against capillary rising moisture in all mineral building materials. Can be applied from inside and/ or outside. Can be applied in cases of high degrees of moisture penetration and with all degrees of salt contamination.

Description

A very thin, solvent-free, concentrated liquid synthetic resin. It penetrates deeply into even the smallest capillaries and pores in building materials. Due to its very low density and a surface tension lower than that of water, it displaces the water in the capillaries.

Capillaries lined with Köster Crisin 76 Concentrate are lined with resin and are hydrophobic. The curing of the injected product is independent of the drying of the masonry. After full cure, it remains flexible, does not decay or decompose, acts neutrally, does not effloresce and does not affect steel reinforcement. During application and after full cure, it is resistant to all of the usual corrosives in masonry such as acids, alkalis and salts.

Applications:

For saturation and pressureless injection, for creating subsequent horizontal waterproofing against capillary rising moisture in all mineral building materials. Can be applied from inside and/ or outside. Can be applied in cases of high degrees of moisture penetration and with all degrees of salt contamination.

General information
Material

Synthetic resin

Uniclass 2015 Injection mortar damp-proof courses (Pr_20_31_53_41)
Specification data
Product Reference

Köster Crisin 76 Concentrate

Standard product features

Material:

Synthetic resin.

Consumption:

0.04 L/m/cm wall thickness.

Technical characteristics:

  • Density: 0.91 g/cm³.
  • Type of effect: Pore restricting/ hydrophobizing.
  • Viscosity: 10–15 mPa·s.
  • Active ingredients: 70%.

Similar products from Delta Membrane Systems Ltd