Kirby Cycle Stand - Stainless Steel

138515155

The VELOPA Kirby Cycle Stand is based on the popular Sheffield Cycle Stand. A familiar sight throughout the UK, the design allows the frame and wheel of the bicycle to be secured by the cyclists own lock. Each stand is suitable for securing two bicycles at once.

Features and benefits:

• Supplied galvanized and ragged as standard; flanged, colour coated and stainless steel versions are also available. RAL/BS numbers must be specified at time of order.
• Reflective tape can be added to maximise visibility.
• 750 x 750 mm (height x length).
• 48 mm diameter tube.
• 3 mm wall thickness (galvanized).
• 2 mm wall thickness (stainless).
• 300 mm below ground (ragged only).

Installation:

• Flanged versions require bolting onto established concrete of at least 300 mm³ per leg.
• Ragged versions require setting with concrete into a hole of at least 300 x 300 x 350 mm (length x width x depth).
• Allow at least 800 mm between stands and a minimum of 450 mm from any obstruction.