Kingspan Thermataper TT47

Third party certifications:

BBA Agrément Certificate
Certificate type

A high performance, rigid thermoset polyisocyanurate (PIR) tapered insulation board for use beneath mechanically fixed or fully adhered single ply waterproofing and partially bonded built-up felt and mastic asphalt flat roofing systems.

Jump to:

Application

For use beneath mechanically fixed/fully adhered single ply waterproofing and partially bonded built-up felt and mastic asphalt flat roofing systems.

Description

A tapered version of Kingspan Thermaroof TR 27, this PIR insulated board is designed for use beneath mechanically fixed or fully adhered single ply non-bituminous roofing systems. The tapered design prevents water ponding, the most common cause of failure of flat roofs.

U-value calculations incorporate BS EN ISO 6946: 1997- Annex C (Building Components and Building Elements). Annex C outlines the calculation procedure to determine the total thermal transmittance of tapered insulation – what is termed the 'Annex C U Value'.

It is CFC-/ HCFC-free and manufactured with a blowing agent that has zero ozone depletion potential (ODP). Achieves BRE Green Guide A, and manufactured in accordance with BS EN 13165: 2001 (Thermal insulation products for buildings – Factory made rigid polyurethane foam (PUR) products – Specification).

Manufactured under a management system certified to ISO 9001: 2015 (Quality Management Systems. Requirements), ISO 14001: 2015 (Environmental Management Systems. Requirements), BS OHSAS 18001: 2007 (Occupational Health & Safety Management Systems. Requirements) and ISO 50001: 2011 (Energy Management Systems. Requirements with guidance for use).

Fire Performance

Details on the fire performance of Kingspan Insulation products may be obtained from the Kingspan Insulation Technical Service Department.

Responsible sourcing:

Certified to BES 6001 (Framework Standard for the Responsible Sourcing of Construction Products) for boards produced at Kingspan Insulation’s Pembridge and Selby manufacturing facilities.

Application:

For use beneath mechanically fixed/fully adhered single ply waterproofing and partially bonded built-up felt and mastic asphalt flat roofing systems.

General information

Finish	Coated glass tissue
Features	Specifically designed to prevent water ponding, use beneath mechanically fixed or fully adhered single ply non-bituminous roofing systems. Manufactured with a blowing agent that has zero ozone depletion potential (ODP). Achieves BRE Green Guide rating A
Material	Polyurethane foam
Size	1. 2 x 1.2 m (width x length)
Uniclass 2015	Pr_25_71_63_66 Polyisocyanurate (PIR) foam boardsPrimary
CAWS	J21/10 Warm deck roof coating J21/420 Rigid urethane foam warm deck roof insulation J41/10 Built-up reinforced bitumen membrane warm deck roof covering J41/420 Rigid urethane foam warm deck roof insulation J42/10 Warm deck roof covering J42/420 Rigid urethane foam warm deck roof insulation

Specification data - Polyisocyanurate (PIR) foam boards Enhanced data

Product Reference	Kingspan Thermataper TT47
Standard	To standard BS EN 13165: 2001
Third party product certification	Certified to BES 6001
Thermal conductivity (maximum)	<80 mm: 0.026 W/m·K, 80–119 mm: 0.025 W/m·K, ≥120 mm: 0.024 W/m·K
Face Size (l x w)	1200 x 1200 mm
Compressive Strength (at 10% deformation)	150 kPa
Facing	Faced on both sides with a low emissivity composite foil autohesively bonded to the insulation core during manufacture
Standard Falls	1 :30 1: 40 1: 60 1: 80

Standard product features

Features:

Specifically designed to prevent water ponding, use beneath mechanically fixed or fully adhered single ply non-bituminous roofing systems. Manufactured with a blowing agent that has zero ozone depletion potential (ODP). Achieves BRE Green Guide rating A.

Finish:

Coated glass tissue.

Material:

Polyurethane foam.

Size:

1. 2 x 1.2 m (width x length).

Third party certifications