Kingspan Thermaroof® TR27

Third party certifications:

BBA Agrément Certificate
Certificate type

A high performance, rigid thermoset polyisocyanurate (PIR) flat roof insulation board for use beneath mechanically fixed/fully adhered single ply waterproofing and partially bonded built-up felt and mastic asphalt.

Jump to:

Application

For use beneath mechanically fixed/fully adhered single ply waterproofing and partially bonded built-up felt and mastic asphalt.

Description

Designed for use beneath mechanically fixed or fully adhered single ply non-bituminous roofing systems. CFC-/ HCFC-free and manufactured with a blowing agent that has zero ozone depletion potential (ODP).

Manufactured in accordance with BS EN 13165: 2001 (Thermal insulation products for buildings – Factory made rigid polyurethane foam (PUR) products – Specification). Also manufactured under a management system certified to ISO 9001: 2015 (Quality Management Systems. Requirements), ISO 14001: 2015 (Environmental Management Systems. Requirements), BS OHSAS 18001: 2007 (Occupational Health & Safety Management Systems. Requirements) and ISO 50001: 2011 (Energy Management Systems. Requirements with guidance for use).

Product is produced at Kingspan Insulation’s Pembridge and Selby manufacturing facilities and covered by BBA Certificate 06/4372.

Responsible sourcing:

Certified to BES 6001 (Framework Standard for the Responsible Sourcing of Construction Products) for boards produced at Kingspan Insulation’s Pembridge and Selby manufacturing facilities. Achieves a BRE Green Guide rating A.

Application:

For use beneath mechanically fixed/fully adhered single ply waterproofing and partially bonded built-up felt and mastic asphalt.

General information

Finish	Coated glass tissue
Features	Manufactured with a blowing agent that has zero ozone depletion potential (ODP) and designed for use beneath mechanically fixed or fully adhered single ply non-bituminous roofing systems. Achieves a BRE Green Guide rating of A
Material	Polyurethane foam
Size	1.2 m, 2.4 m (length) x 0.6 m, 1.2 m (width)
Uniclass 2015	Pr_25_71_63_66 Polyisocyanurate (PIR) foam boardsPrimary
CAWS	J31/10 Warm deck roof coating J31/335 Warm deck roof insulation J41/10 Built-up reinforced bitumen membrane warm deck roof covering J41/420 Rigid urethane foam warm deck roof insulation J42/10 Warm deck roof covering J42/420 Rigid urethane foam warm deck roof insulation

Specification data - Polyisocyanurate (PIR) foam boards Enhanced data

Product Reference	Kingspan Thermaroof® TR27
Standard	To standard BS EN 13165: 2001
Third party product certification	Certified to BES 6001 and covered by BBA Certificate 06/4372
Fire performance	Details on the fire performance of Kingspan Insulation products may be obtained from the Kingspan Insulation Technical Service Department
Thermal conductivity (maximum)	<80 mm: 0.026 W/m·K, 80–119 mm: 0.025 W/m·K, ≥120 mm: 0.024 W/m·K
Face Size (l x w)	1.2m, 2.4m (length) x 0.6 m, 1.2m (width)
Compressive Strength (at 10% deformation)	150 kPa
Facing	Faced on both sides with a coated glass tissue based facing autohesively bonded to the insulation core during manufacture

Standard product features

Features:

Manufactured with a blowing agent that has zero ozone depletion potential (ODP) and designed for use beneath mechanically fixed or fully adhered single ply non-bituminous roofing systems. Achieves a BRE Green Guide rating of A.

Finish:

Coated glass tissue.

Material:

Polyurethane foam.

Size:

1.2 m, 2.4 m (length) x 0.6 m, 1.2 m (width).

Third party certifications