Kestrel Aluminium Commercial Doors

Application

Suitable for all types of buildings where entrances and doors of a commercial nature are required.

Description

An aluminium alloy range of doors. Door sections are square cut and assembled with extruded engineered cleats and M10 tie rods for additional strength and robustness. Infills of glass are glazed by bead glazing internally and externally. All vertical door beads are mechanically fixed externally for security. The system will accommodate a range of glazing thicknesses from 6 to 11 mm for single glazed units and from 24 to 28 mm double glazed units. Glass is set dry between TPE gaskets internally and externally, and weatherstripping is woven pile, polypropylene backed, premier density.


Features and benefits:

  • Pivot, hinged and sliding doors can be constructed from the section range.

General information

Finish

Anodized

Powder coated

Material

Aluminium

Size

Sliding folding:

  • Door width: 500-900 mm.
  • Maximum door height: 2700 mm.

Pivot:

  • Maximum door width: 1250 mm.
  • Maximum door height: 2500 mm (dependent on hinge specified).

-

WarrantyDescription

Ten years

Kestrel Aluminium Profiles have a ten-year Warranty. See powder coating guarantee.

Uniclass 2015

Pr_30_59_24_52 Metal doorsetsPrimary

CAWS

L20/480 Doorsets

Specification data - Metal doorsets Enhanced data

Configuration

Single leaf.

Double leaf.

Sliding.

Automatic.

Doorset size

Sliding folding:

Door width: 500-900 mm.

Maximum door height: 2700 mm.

Pivot:

Maximum door width: 1250 mm.

Maximum door height: 2500 mm (dependent on hinge specified).

-

Frame

-

Material

Aluminium.

Finish

-

Coating

Powder coating to BS EN 12206-1:2004.

Anodizing to BS 3987:1991.

Natural anodized finish AA25.

Door leaf

-

Material

Aluminium.

Glazing

-

Type

28 mm insulating glass units incorporating low emissivity glass (en = 0.05) and argon filled cavity. Inner pane 6 mm toughened, and outer pane 6.4 mm laminated, to Building Regulations including Document L and BS 6180 where applicable. Maximum centre pane U-Value = 1.2 W/m²K. Glazing on the southeast and southwest elevations to have Guardian Sunguard HS Superneutral 70/71 coating.

Manifestation

Not required.

Required.

Finish

-

Coating

Powder coating to BS EN 12206-1:2004.

Anodizing to BS 3987:1991.

Natural anodized finish AA25.

Hardware

KAS433 - Concealed vertical rod exit device, AR.

KAS504.H - MS 2200 Hook lock with KAS523 euro-profile cylinder.

KAS571 - Shoot bolts in silver anodized finish (double doors only).

KAS574 - Concealed overhead closer.

KAS577 - Face fitted panic bar, EXIDOR 294.

KAS578 - Concealed vertical rod exit device, AXIM.

Handles to comply with DDA.

Product Reference

Kestrel Aluminium Systems Limited GFT door

Double Action Doors with finger guard

Environmental information

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Literature

Case studies

Similar products from Kestrel Aluminium Systems