Secondary support structure | Fastening by means of vertical system rail K20. Guidance for specification option: - The profiles of the basic substructure have to be mounted perpendicularly and in a flush way. (T-profile width ≥ 80 mm; recommended width ≥ 100 mm).
- The system rails K20 (Art. no. 620, 625, 630) have to be precisely aligned horizontally and fastened at the provided holes by means of screws (Art. no. 659-01) or rivets (Art. no. 658).
- The distance of the system rails K20 in horizontal direction must correspond to the longitudinal grid of the panels.
- The length of the vertical profiles must be divisible by the height of the panel format and should not exceed the height of a storey of the building.
- A profile butt joint behind a panel is not allowed.
- In case of open vertical joints, one joint spacer per panel (Art. no. 645) is inserted in a centric extrusion hole of the panel.
- In case of closed vertical joints, the joint profile (Art. no. 640 in case of single-span girder; plug-in joint profile, Art. no. 647, in case of single-span girder with jibs) must be used.
Fastening by means of vertical T-profile K20. Guidance for specification option: - Mount the T-profiles K20 (Art. no. 695) perpendicularly and in a flush way.
- Exactly align the T-profiles K20 horizontally.
- Open vertical joints with T-profile K20 (Art. no. 695Q) with spacer (Art. no. 645).
- In the case of closed vertical joints, the joint profile (Art. no. 640Q in case of single-span girder, plug-in joint profile, Art. no. 647, in case of single-span girder with jibs) must be used.
Fastening by means of vertical Omega profile K20. Guidance for specification option: - The profiles of the basic substructure have to be mounted perpendicularly and in a flush way (top-hat or alternatively Z-profile).
- The Omega profiles K20 (Art. no. 624, 627, 633) have to be precisely aligned horizontally and be fixed through the long holes provided on the edge by means of screws (Art. no. 659-01) or rivets (Art. no. 658). (Pay attention to fixed and sliding point execution!).
- The distance of the rails in horizontal direction must correspond to the longitudinal grid of the panels.
- A profile butt joint behind a panel is not allowed.
- In case of open vertical joints, one joint spacer per panel (Art. no. 645) is inserted in a centric extrusion hole of the panel.
- n case of closed vertical joints, the joint profile (Art. no. 640 in case of single-span girder; plug-in joint profile, Art. no. 647, in case of single-span girder with jibs) must be used.
Fastening with OmegaV profile for laying in bonds. Guidance for specification option: - The profiles of the basic substructure have to be mounted perpendicularly and in a flush way.
- Fix the horizontal supporting profiles (Art. no. 597) at the pre-installed vertical substructure by means of supplied fastening materials.
- Hang in the OmegaV profiles exactly at horizontal grid distance.
- The distance of the profiles in horizontal direction must correspond to the longitudinal grid of the panels.
- The position of the OmegaV profiles is secured at the suspension brackets on the left and the right by means of screws (Art. no. 659-01).
- In case of open vertical joints, one joint spacer per panel (Art. no. 645) is inserted in a centric extrusion hole of the panel.
- In case of closed vertical joints, the joint profile OmegaV (Art. no. 707) must be used.
- In case of single-span girder, the plug-in joint profile OmegaV (Art. no. 712 in case of single-span girder with jibs) must be used.
Fastening OmegaS with Omega profile and supporting profile. Guidance for specification option: - The profiles of the basic substructure have to be mounted perpendicularly and in a flush way.
- Fix the horizontal K20 Omega profiles (Art. no. 627) at the pre-installed vertical substructure by means of the supplied fastening materials. The vertical distance depends on the panel length - single-span girder (= 1/2 of panel length), with jibs on both sides (= 1/4 of panel length).
- Mount the supporting profiles according to the height grid (panel length + 8 mm).
- Position the securing brackets (Art. no. 711) at both Omega profiles and fix them.
- Alternatively, secure upper and lower end of the panels at the supporting profiles by means of R-clamps (Art. nos. 682R, 683R, 684R).
Fastening with clamp system K20. Guidance for specification option: - The profiles of the basic substructure have to be mounted perpendicularly and in a flush way.
- The distance of the bearing profiles (profile width ≥ 60 mm) in horizontal direction must correspond to the longitudinal grid of the panels.
- The length of the vertical profiles must be divisible by the height of the panel format and should not exceed the height of a storey of the building.
- A profile butt joint behind a panel is not allowed.
- In the vertical joints, the black joint tape (Art. no. 506) can be applied.
- The clamps (Art. no. 680, 681, 682, 683, 684) must be fastened with at least 2 rivets (Art. no. 675-01) or 2 screws (Art. no. 657).
- For the processing of the rivets (Art. no. 675-01), an extended rivetting tool (25 mm) is required.
- In the area of the clamp fastening, the joints can be closed with the joint profile (Art. no. 688) and one holding clip for joint profile (Art. no. 689) per panel.
|
System accessories | Article 620. Guidance for specification option: - Fastening with vertical system rail K20.
- System rail, painted.
- Material: AlMg3 H22 (EN AW-5754) painted black, RAL 7021.
Article 625. Guidance for specification option: - Fastening with vertical system rail K20.
- System rail, bright.
- Material: AlMg3 H22 (EN AW-5754) unpainted.
Article 630. Guidance for specification option: - Fastening with vertical system rail K20.
- System rail, external angle.
- Material: AlMg3 H22 (EN AW-5754) unpainted.
- For installation of mitre-cut panels and external angle profiles.
Article 635. Guidance for specification option: - Fastening with vertical system rail K20.
- Embrasure profile.
- Material: AlMg3 H22 (EN AW-5754) unpainted.
- Dimensions and grid according to project-specific requirements.
Article 640. Guidance for specification option: - Fastening with vertical system rail K20, vertical omega profile K20.
- Joint profile K20/8.
- Material: AlMg3 H22 (EN AW-5754), painted black, RAL 7021, RAL-color-painted on request.
Article 645. Guidance for specification option: - Fastening with vertical system rail K20, Fastening with vertical T-profile K20, vertical omega profile K20, OmegaV profile for laying in bonds.
- Joint spacer K20/8.
- Weight: 0.5 kg / box.
- Material: AlMg3 H22 (EN AW-5754), painted black RAL 7021.
- Box contents: 250 pieces.
Article 658. Guidance for specification option: - Fastening with vertical system rail K20, vertical omega profile K20, OmegaV profile for laying in bonds, OmegaS with Omega profile and supporting profile.
- AI blind rivet, bright.
- Weight: 1.3 kg / box.
- Nominal dimensions: 4.8 x 10 mm.
- Box contents: 500 pieces.
Article 659-01. Guidance for specification option: - Fastening with vertical system rail K20, vertical omega profile K20, OmegaV profile for laying in bonds, OmegaS with Omega profile and supporting profile.
- A4 stainless steel screw, bright.
- Weight: 2.8 kg / box.
- Nominal dimensions: 4.8 x 16 mm.
- Box contents: 1,000 pieces + 1 bit.
Article 650 / 652 / 654. Guidance for specification option: - Fastening with vertical system rail K20, vertical omega profile K20, OmegaV profile for laying in bonds.
- External angle profile Square / Sword / Negative.
- Material: AlMg3 H22, painted black, RAL 7021, RAL-color-painted on request.
Article 647. Guidance for specification option: - Fastening with vertical system rail K20, vertical omega profile K20.
- Plug-in joint profile K20/8.
- Material: AlMg3 H22, painted black, RAL 7021, RAL-color-painted on request.
- For installation in case of single-span girder with jibs.
- Length: 1496 mm.
Article 682R. Guidance for specification option: - Fastening with vertical system rail K20, Fastening with vertical T-profile K20, vertical omega profile K20, OmegaV profile for laying in bonds, OmegaS with Omega profile and supporting profile.
- R-clamp.
- Material: AlMg3 H22, painted black.
Article 683R. Guidance for specification option: - Fastening with vertical system rail K20, Fastening with vertical T-profile K20, vertical omega profile K20, OmegaV profile for laying in bonds, OmegaS with Omega profile and supporting profile.
- R-clamp.
- Material: AlMg3 H22, painted black.
Article 684R. Guidance for specification option: - Fastening with vertical system rail K20, Fastening with vertical T-profile K20, vertical omega profile K20, OmegaV profile for laying in bonds, OmegaS with Omega profile and supporting profile.
- R-clamp.
- Material: AlMg3 H22, painted black.
Article 657. Guidance for specification option: - Fastening with vertical system rail K20, Fastening with vertical T-profile K20, vertical omega profile K20, OmegaV profile for laying in bonds, OmegaS with Omega profile and supporting profile, clamp system K20.
- A2 stainless steel screw.
- Black head.
- For fastening of R-clamp.
Article 695Q. Guidance for specification option: - Fastening with vertical T-profile K20.
- Material: EN AW-6060 T6, painted black.
- For installation with joint profile 640Q and joint spacer K20/8.
Article 640Q. Guidance for specification option: - Fastening with vertical T-profile K20.
- Joint profile.
- Material: EN AW-6063 T66, painted black.
Article 647. Guidance for specification option: - Fastening with vertical T-profile K20.
- Plug-in joint profile K20/8.
- Material: AlMg3 H22.
- Painted black.
- RAL-color-painted on request.
- For installation in case of single-span girder with jibs.
- Length: 1496 mm.
Article 624. Guidance for specification option: - Fastening with vertical omega profile K20.
- Omega profile, painted.
- Material: AlMg3 H22, painted black.
- For installation with joint spacer K20/8.
Article 627. Guidance for specification option: - Fastening with vertical omega profile K20, OmegaS with Omega profile and supporting profile.
- Omega profile, bright.
- Material: AlMg3 H22, unpainted.
- For installation with joint profile K20/8.
Article 633. Guidance for specification option: - Fastening with vertical omega profile K20.
- Omega profile, external angle.
- Material: AlMg3 H22, unpainted.
- For the installation of mitre-cut panels and external angle profiles.
Article 597-01. Guidance for specification option: - Fastening with OmegaV profile for laying in bonds.
- Horizontal supporting profile, perforated.
- Standard length: 2995 mm.
- Nominal dimensions: 05/90 x 25 mm.
- Material: EN AW 6063 T66 unpainted.
Article 700. Guidance for specification option: - Fastening with OmegaV profile for laying in bonds.
- OmegaV, painted.
- Material: AlMg3 H22, painted black.
- For installation with joint spacer K20/8.
Article 701. Guidance for specification option: - Fastening with OmegaV profile for laying in bonds.
- OmegaV, bright.
- Material: AlMg3 H22, unpainted.
- For installation with joint profile OmegaV K20/8.
Article 705. Guidance for specification option: - Fastening with OmegaV profile for laying in bonds.
- OmegaV, external angle, bright.
- Material: AlMg3 H22, unpainted.
- For the installation of mitre-cut panels and external angle profiles.
Article 707. Guidance for specification option: - Fastening with OmegaV profile for laying in bonds.
- Joint profile OmegaV K20/8.
- Material: AlMg3 H22, painted black RAL-color-painted on request.
Article 712. Guidance for specification option: - Fastening with OmegaV profile for laying in bonds.
- Plug-in joint profile OmegaV K20/8.
- Material: AlMg3 H22, painted black RAL-color-painted on request.
Article 710. Guidance for specification option: - Fastening with OmegaS with Omega profile and supporting profile.
- Material: AlMg3 H22, painted black.
Article 711. Guidance for specification option: - Fastening with OmegaS with Omega profile and supporting profile.
- Position securing bracket, bright.
- Material: AlMg3 H22, unpainted.
- Box contents: 50 pieces.
Article 688. Guidance for specification option: - Fastening with OmegaS with Omega profile and supporting profile, clamp system K20.
- Joint profile.
- Material: EN AW 6063 T66, painted black, RAL-color-painted on request.
- Length: 1496 mm.
Article 689. Guidance for specification option: - Fastening with OmegaS with Omega profile and supporting profile, clamp system K20.
- Holding clip for joint profile.
- Material: AlMg1, unpainted.
- Box contents: 100 pieces.
Article 680. Guidance for specification option: - Fastening with clamp system K20.
- Twin-clamp K20.
- Weight: 45 kg / 1,000 pieces.
- Perforation: 2 x 3.3 mm Ø.
- Material: AlMg3 H22, painted black.
Article 681. Guidance for specification option: - Fastening with clamp system K20.
- Edge-clamp K20.
- Weight: 24 kg / 1,000 pieces.
- Perforation: 4 x 3.3 mm Ø.
- Material: AlMg3 H22, painted black.
Article 682. Guidance for specification option: - Fastening with clamp system K20.
- Edge-clamp K20, left.
- Weight: 24 kg / 1,000 pieces.
- Perforation: 4 x 3.3 mm Ø.
- Material: AlMg3 H22, painted black.
Article 683. Guidance for specification option: - Fastening with clamp system K20.
- Edge-clamp K20, right.
- Weight: 24 kg / 1,000 pieces.
- Perforation: 4 x 3.3 mm Ø.
- Material: AlMg3 H22, painted black.
Article 684. Guidance for specification option: - Fastening with clamp system K20.
- Single-clamp K20.
- Weight: 45 kg / 1,000 pieces.
- Perforation: 2 x 3.3 mm Ø.
- Material: AlMg3 H22, painted black.
Article 675-01. Guidance for specification option: - Fastening with clamp system K20.
- Stainless steel blind rivet, black.
- Weight: 1.05 kg / box.
- Nominal dimensions: 3.2 x 9.5 mm.
- Box contents: 500 pieces.
- extended mandrel (58 mm).
Article 506. Guidance for specification option: - Fastening with clamp system K20.
- Joint tape, black.
- Weight: 0.5 kg / roll.
- Nominal dimensions: 40 mm wide, 50 m.
- Self-adhesive, weather-resistant.
|