External manhole cover for block paved areas.
External manhole cover for block paved areas.
Features and benefits:
Size | Bespoke Consult manufacturer for details and insert requirements. Manufacturer's standard As 'Type' above. |
Uniclass 2015 | |
CAWS | P30/301 Access covers/ manhole tops and frames |
Product Reference | Multi Paver KMP |
Type | KMP-1200/600Two trays; clear opening: 1200 x 600 mm. KMP-1200/1200Four trays; clear opening: 1200 x 1200 mm. KMP-1800/600Three trays; clear opening: 1800 x 600 mm. KMP-1800/1200Six trays; clear opening: 1800 x 1200 mm. KMP-1800/1800Nine trays; clear opening: 1800 x 1800 mm. KMP-2400/600Four trays; clear opening: 2400 x 600 mm. KMP-2400/1200Eight trays; clear opening: 2400 x 1200 mm. KMP-2400/180012 trays; clear opening: 2400 x 1200 mm. KMP-2400/240016 trays; clear opening: 2400 x 2400 mm. |
Size | BespokeConsult manufacturer for details and insert requirements. Manufacturer's standardAs 'Type' above. |
Load class | BS EN 124 A15Slow moving wheel load: 0.6 tonnes. Kent safety test (unfilled): 1.5 tonnes. BS EN 124 B125Slow moving wheel load: 5 tonnes. Kent safety test (unfilled): 12.5 tonnes. BS EN 124 C250Slow moving wheel load: 6.5 tonnes. Kent safety test (unfilled): 25 tonnes. BS EN 124 D400Slow moving wheel load: 11 tonnes. Kent safety test (unfilled): 40 tonnes. FACTA ASlow moving wheel load: 0.6 tonnes. Kent safety test (unfilled): 0.8 tonnes. FACTA AASlow moving wheel load: 1.5 tonnes. Kent safety test (unfilled): 3.1 tonnes. FACTA AAASlow moving wheel load: 2.5 tonnes. Kent safety test (unfilled): 5.2 tonnes. FACTA BSlow moving wheel load: 5 tonnes. Kent safety test (unfilled): 10.1 tonnes. FACTA CSlow moving wheel load: 6.5 tonnes. Kent safety test (unfilled): 13.2 tonnes. FACTA DSlow moving wheel load: 11 tonnes. Kent safety test (unfilled): 22 tonnes. |
Material | - |
Type | 1.4307 (304L) stainless steelStandard. 1.4404 (316L) stainless steelRecommended for coastal regions and outdoor areas where de-icing salts are common. Galvanized carbon steelTo BS EN ISO 1461 (1999). |
Thickness | Not applicableGalvanized carbon steel. 6 mmStainless steel only. 8 mmStainless steel only. 10 mmStainless steel only. |
Tray depth | 80 mmStandard. 100 mm |
Seal | Required (double sealed)Not required |
Beam pockets | Not requiredRecessedVertical wall mounted |
Lettering (lifting corners) | RequiredInsert requirements. Not required |
Product Options | Visible frame size (unsealed):
Beam pockets: - Recessed: Pockets are formed in the frame to allow space for the I-beam to be dropped into place. Both the frame and the I-beam are supported by the cast concrete of the retaining wall. - Vertical wall mounted: Pockets are bolted to the retaining wall, underneath the frame. The removable I-beam then sits in the pockets and supports the loading on the tray or grille above. These pockets are to be bolted into place by the contractor on site. Lettering (lifting corners): Identification normally comprises:
|
Commercial Manhole Cover
In Ground Potable Water Unit – KIGPWU400/450
In Ground Power Unit - KIGU600/600
Kent Hinged Multi Paver KHMP
Kent Hinged Solo Internal Manhole KMHD900/900 HLA
Kent Hinged Vinyl Manhole
Kent Multi Tray Internal Manhole (KMHD1200/600)
Kent Solo Internal Manhole (KMHD600)
Kent Solo Paver KSP
Kent Triple Seal Odour Tight