Keim Royalan
Mineral silicate based masonry paint system for harsh climates and environments.
Suitable for all mineral substrates, for use on both painted and unpainted surfaces.
A minimum period of 12 hours must be left to elapse between coats. Apply by brush, roller or spray and work well into all surfaces.
mineral paint system developed to withstand harsh climatic conditions, suited for use in exposed locations and those subject to continual pollutants and contaminants. Keim Royalan offers protection from water ingress, and has proven longevity with UV-stable/ fade-free colours. It provides long-term decoration and is available in a wide range of standard colour shades.
Features:
- High light reflectivity.
- Odourless.
- Environmentally friendly.
- VOC and solvent free.
- Chemical crystalline bond.
- Matt finish.
- Incombustible.
- Suitable for previously painted and unpainted surfaces.
Surface preparation:
- All loose, flaking and unstable material must be identified and then thoroughly removed using stiff brushes and broad bladed scrapers to get back to a sound edge; these edges should then be feathered in. Ensure that any paint materials left remaining and the underlying substrate is sound and adhering well. Any gloss or shiny surfaces should be thoroughly flatted down using sand or emery paper to create a good key.
- Any new/ repaired surfaces should be left for a minimum period of 15 days prior to any decoration taking place.
- All surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using Keim Mineral Paints may proceed.
- Any algae growth should be wire brushed to remove all growths and treated with Keim Algicid, brush applied undiluted and allowed to remain undisturbed for three hours before thoroughly washing off.
- Any cracks or where there is a need to equalise the surface should be filled using Keim Spachtel, a ready to use silicate mineral filler, brush or trowel applied to a pre-wetted surface and dressed back to the required level.
Application:
Suitable for all mineral substrates, for use on both painted and unpainted surfaces.
A minimum period of 12 hours must be left to elapse between coats. Apply by brush, roller or spray and work well into all surfaces.
Features | High light reflectivity Odourless Environmentally friendly VOC and solvent free Chemical crystalline bond |
Uniclass 2015 | |
CAWS | M60/10 Emulsion paint M60/110 Emulsion paint |
Product Reference | Keim Royalan |
Primer | Not requiredKeim Royalan DilutionFor highly absorbent or friable surfaces. Keim Royalan GrobFor previously painted surfaces. |
Number of coats | Two coats recommended. |
Thinning | Keim Royalan Dilution 20% by weight in initial coat |
Colour | Insert colour reference. Consult Keim Mineral Paints for details of available colours. |
Standard product features | Composition: Manufactured from pure inorganic mineral fillers, earth oxides colour pigments and potassium silicate. Consumption: 0.4 kg/m² for two coats on a smooth surface. Application:
Moisture vapour permeability: Sd: <0.01m. |
Product Options | Primer: - Keim Ryalan Grob: A mineral silicate based primer coat, diluted 20% by weight with Keim Royalan Dilution, a liquid silicate binder, mechanically mixed. Apply by brush or roller and work well into all surfaces. Colour: Available in over 350 standard shades from the Exclusiv colour range. Colour matches and bespoke colour. |