NBS Source
List your products

Suitable for new build and refurbishment projects; can be used with all existing support structures and wall constructions.


Non-penetrative facade system, which incorporates a fast-to-install, lightweight flat rainscreen panel, suitable for both new build and refurbishment projects.

The system is highly flexible, allowing the installation of the profiles to be carried out in two directions, either from the top down or from the bottom up. This allows for easier and faster installation compared to conventional panel systems, but also allows scaffolding or subsequent construction work to be coordinated independently from the installation process.

Features and benefits

  • Contemporary, visually appealing aesthetics.
  • Various standard profile widths are available, providing flexibility and scope for design.
  • Highly cost-effective through simple and fast installation.
  • Panels can be installed horizontally and vertically.
  • Supported by the proprietary modular click rail or mono-click bracket without the need for screws or rivets.
  • Optimized panel geometry means low inherent weight and reduced use of materials.
  • A wide range of colour and surface finishes with edge folding are available.
  • Internal and external corner panels can be integrated if required.
  • High structural performance.
  • Creation of fixed point with a specially designed fixed point clamp, which allows panel adjustment after installation.
  • In case of damage, the Kalzip® FC rainscreen allows the replacement of individual panels without having to dismantle the entire facade. A panel can be removed quickly and simply using the specially developed tools from the Kalzip® FC tool kit - consult manufacturer for details.


Suitable for new build and refurbishment projects; can be used with all existing support structures and wall constructions.

General information
Specification data - Drained and back-ventilated rainscreen cladding systems
Product Reference

Kalzip FC Façade Rainscreen System

FC rainscreen profile -

FC Rainscreen 30/250

FC Rainscreen 30/300

FC Rainscreen 30/350

FC Rainscreen 30/400

FC Rainscreen 30/450

FC Rainscreen 30/500


1.0 mm (nominal)

1.2 mm (nominal)


Aluminium AluPlusPatina

Aluminium, with a polyester paint coating

Aluminium, with a PVDF paint coating

Aluminium, with an HPC paint coating

Panel options

Not required

Edge returns - removal



FC rail type

FC SE Rail

Self-supporting rail that can be used as load-bearing profile and can be fastened to a sub-construction independent of the joint position.


A load-bearing rail and can be fastened directly to L wall holders thanks to the 50mm long web. A further support profile is not necessary.

Corner panels

Not required


Different angles are available; consult manufacturer for details.


Different angles are available; consult manufacturer for details.


Not required

Click rail adapter

For SE and SEL modular click rails.

Flashing support

Material and finish as per cladding sheets or as per project requirements - consult manufacturer for details.

Fixed point clamp

One per panel.

Guidance snapper

One per panel.

Mono-click brackets

Used in particular for rainscreen areas with changing panel widths or with complex connection details. It must always be fastened with two screws or rivets.

Product Options

Panel options:

- Edge returns - removal:

Supplied as standard with edge returns on both sides. Can also be manufactured without edge return on enquiry.


- Click rail adapter:

The adapter can be installed either on the top or the bottom part of the rail. Due to this, two plastic inlays (left and right handed) are supplied, which are to be cut and installed on site.

- Flashing support:

Snapped into the modular rail, for simple and quick installation of flashings.