NBS Source
List your products

This product is no longer available

Application

Interseal 670HS is suitable for overcoating intact, aged alkyd, epoxy and polyurethane systems. However, this product is not recommended where thermoplastic coatings such as chlorinated rubbers and vinyl have previously been used. Consult International Protective Coatings for alternative recommendations. Interseal 670HS can be used as a non-skid deck system by modification with addition of GMA132 (crushed flint) aggregate. Application should then be to a suitably primed surface.

Description

For application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings. Provides excellent anti-corrosive protection in industrial, coastal structures, pulp and paper plants, bridges and offshore environments in both atmospheric exposure and immersion service. Available in an aluminium pigmented version to provide additional anti-corrosive barrier protection.

Certified to NSF/ ANSI 61 (for tanks greater than 378.5 L).

Applications:

Interseal 670HS is suitable for overcoating intact, aged alkyd, epoxy and polyurethane systems. However, this product is not recommended where thermoplastic coatings such as chlorinated rubbers and vinyl have previously been used. Consult International Protective Coatings for alternative recommendations. Interseal 670HS can be used as a non-skid deck system by modification with addition of GMA132 (crushed flint) aggregate. Application should then be to a suitably primed surface.

General information
Specification data - Aluminium paints
Product Reference

Interseal® 670HS

Colour

Consult manufacturer and insert requirements.

Product Options

Technical details:

  • Gloss level: Semi-gloss (aluminium is eggshell).
  • Typical thickness: 100–250 microns dry; 122–305 microns wet.

Recommended primers/ topcoats:

Interseal 670HS will normally be applied to correctly prepared steel substrates. However, it can be used over suitably primed surfaces. Suitable primers are:

  • Intercure 200.
  • Intergard 269.
  • Interplus 256.
  • Interplus 356.
  • Interzinc 315.

Where a cosmetically acceptable topcoat is required the following products are recommended:

  • Intercryl 530.
  • Interfine 629HS.
  • Interfine 878.
  • Interfine 979.
  • Intergard 740.
  • Interthane 870.
  • Interthane 990.

Other suitable primers/ topcoats are available. Consult International Protective Coatings.