NBS Source
List your products
Intercure® 99
Application

Rapid cure and early handling properties make the product ideal for applications such as wind towers, transformers, mining equipment and pumps where productivity and drying space are of prime importance. The product may be applied over approved anticorrosive primers in some circumstances: consult International Protective Coatings for further advice. It is not designed for continuous water immersion.

Description

Intercure 99 polyaspartic technology is applied as a single coat at 150–250 microns direct-to-metal using standard application equipment, reducing application time and labour costs compared to two coat applications in moderately corrosive environments (up to C3, ISO 12944-2). It is a low VOC, high solids, rapid cure primer/ finish, offering excellent anticorrosive protection and long term colour and gloss durability – a combination that cannot be achieved with alternative fast cure, single coat primer finishes.

Intercure 99 may also be specified as a high build, durable intermediate/ finish over approved anticorrosive primers for more aggressive environments, e.g. ISO 12944 C4 and C5M.

Applications:

Rapid cure and early handling properties make the product ideal for applications such as wind towers, transformers, mining equipment and pumps where productivity and drying space are of prime importance. The product may be applied over approved anticorrosive primers in some circumstances: consult International Protective Coatings for further advice. It is not designed for continuous water immersion.

General information
Uniclass 2015
Pr_35_31_68_66 Powder coatingsPrimary
CAWS

G10/630 Galvanizing plus site-applied

G10/635 Thermally sprayed zinc coating plus site-applied

G10/638 Shop priming

G10/640 Shop painting

G10/643 Protective painting

G10/65 Shop priming for

G10/650 Site painting

G10/660 Shop plus site painting

G12/20 Shop priming

G12/30 Proprietary

G12/330 Proprietary metal members

G12/650 Shop priming

Specification data - Powder coatings
Product Reference

Intercure® 99

Colour

A wide range is available – consult manufacturer's literature and insert requirements.

Product Options

Technical details:

  • Gloss level: Gloss.
  • Typical thickness: 150–250 microns dry; 188–313 microns wet.

Compatibility:

Intercure 99 may be applied direct to metal in atmospheric environments up to and including C3 (as defined in ISO 12944-2). When using Intercure 99 in atmospheric environments classed as C4 or C5, a recommended primer must be used.

Similar products from International®, brand of AkzoNobel