NBS Source
List your products
Intercure® 324
Application

As a primer for steelwork intended for use in a wide range of environmental conditions including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges. The rapid curing and overcoating properties of Intercure 324 provide production flexibility, making this product suitable for use both in new construction and on site as an industrial maintenance coating.

Intercure 324 is preferred for use with systems for chemical environments where zinc based materials can be subject to attack in both acidic and alkaline conditions. It is not intended for use as a primer for steelwork which may be subjected to continuous immersion conditions.

Intercure 324 will normally be applied to suitable prepared steel, e.g. blast cleaned. However, if necessary, application over prefabrication blast primers can be performed. Consult International Protective Coatings for further details.

Description

A two component, high solids, low VOC, epoxy zinc phosphate/ micaceous iron oxide primer offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with zinc phosphate anti-corrosive pigment to comply with the requirements of BS EN 5493.

Applications:

As a primer for steelwork intended for use in a wide range of environmental conditions including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges. The rapid curing and overcoating properties of Intercure 324 provide production flexibility, making this product suitable for use both in new construction and on site as an industrial maintenance coating.

Intercure 324 is preferred for use with systems for chemical environments where zinc based materials can be subject to attack in both acidic and alkaline conditions. It is not intended for use as a primer for steelwork which may be subjected to continuous immersion conditions.

Intercure 324 will normally be applied to suitable prepared steel, e.g. blast cleaned. However, if necessary, application over prefabrication blast primers can be performed. Consult International Protective Coatings for further details.

General information
Uniclass 2015
Pr_35_31_66_81 Solvent-borne metal primersPrimary
CAWS

G10/630 Galvanizing plus site-applied

G10/635 Thermally sprayed zinc coating plus site-applied

G10/638 Shop priming

G10/640 Shop painting

G10/643 Protective painting

G10/65 Shop priming for

G10/650 Site painting

G10/660 Shop plus site painting

G12/20 Shop priming

G12/30 Proprietary

G12/330 Proprietary metal members

G12/650 Shop priming

Specification data - Solvent-borne metal primers
Product Reference

Intercure® 324

Product Options

Mechanical characteristics:

  • Colour: Sand.
  • Gloss level: Matt.
  • Typical thickness: 75–100 microns dry (equivalent to 104–139 microns wet).

Recommended topcoats/ intermediates:

  • Intercure 384.
  • Intercure 420HS.
  • Intercure 422.
  • Interfine 629HS.
  • Intergard 410.
  • Intergard 475HS.
  • Intergard 540.
  • Intergard 740.
  • Interseal 670HS.
  • Interthane 870.
  • Interthane 990.
  • Interzone 505.
  • Interzone 954.
  • Interzone 1000.

Similar products from International®, brand of AkzoNobel