NBS Source
List your products
Intercure® 200
Application

As a primer for steelwork intended for use in a wide range of aggressive environments, including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges. Suitable for overcoating within three hours in most climatic conditions, hence speeding up production and throughput in fabrication shops. Can also be used on site as a rapid curing, maintenance coating. Intercure 200 can also be used as a primer for substrates other than blasted steel, e.g. stainless steel, alloys etc. Consult International Protective Coatings for further details.

Intercure 200 is not intended for use as a primer for steelwork which may be subjected to immersion conditions.

Description

Formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.

Applications:

As a primer for steelwork intended for use in a wide range of aggressive environments, including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges. Suitable for overcoating within three hours in most climatic conditions, hence speeding up production and throughput in fabrication shops. Can also be used on site as a rapid curing, maintenance coating. Intercure 200 can also be used as a primer for substrates other than blasted steel, e.g. stainless steel, alloys etc. Consult International Protective Coatings for further details.

Intercure 200 is not intended for use as a primer for steelwork which may be subjected to immersion conditions.

General information
Uniclass 2015
Pr_35_31_68_66 Powder coatingsPrimary
CAWS

G10/630 Galvanizing plus site-applied

G10/635 Thermally sprayed zinc coating plus site-applied

G10/638 Shop priming

G10/640 Shop painting

G10/643 Protective painting

G10/65 Shop priming for

G10/650 Site painting

G10/660 Shop plus site painting

G12/20 Shop priming

G12/30 Proprietary

G12/330 Proprietary metal members

G12/650 Shop priming

Specification data - Powder coatings
Product Reference

Intercure® 200

Colour

Limited colour range available; consult manufacturer and insert details.

Product Options

Technical data:

  • Gloss level: Matt.
  • Typical thickness: 75–100 microns dry; 112–149 microns wet.

Compatibility:

Intercure 200 will normally be applied to suitably prepared steel, e.g. blast cleaned. However, if necessary, application over prefabrication blast primers can be performed. Consult InternationalProtective Coatings for further details. The following primers are recommended for Intercure 200:

  • Interzinc 22 (mist coat or tie coat may be required).

The following topcoats/ intermediates are recommended for Intercure 200:

  • Intercure 420.
  • Interfine 979.
  • Intergard 475HS.
  • Intergard 740.
  • Interseal 670HS.
  • Interthane 990.
  • Interzone 1000.
  • Interzone 954.

For other suitable topcoats/intermediates, consult International Protective Coatings.

Similar products from International®, brand of AkzoNobel