NBS Source
List your products
Intercure® 200HS
Application

As a primer for steelwork intended for use in a wide range of environmental conditions including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges. Suitable for overcoating within seven hours in most climatic conditions. Provides quick cure even at low temperatures often encountered in maintenance painting. It can also be used as a primer for substrates other than blasted steel, e.g. stainless steel, alloys etc. Not intended for use as a primer for steelwork which may be subjected to continuous immersion conditions.

Description

Offers excellent barrier protection, low temperature cure and rapid overcoating properties.

Applications:

As a primer for steelwork intended for use in a wide range of environmental conditions including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges. Suitable for overcoating within seven hours in most climatic conditions. Provides quick cure even at low temperatures often encountered in maintenance painting. It can also be used as a primer for substrates other than blasted steel, e.g. stainless steel, alloys etc. Not intended for use as a primer for steelwork which may be subjected to continuous immersion conditions.

General information

Uniclass 2015

Pr_35_31_68_66 Powder coatingsPrimary

CAWS

G10/630 Galvanizing plus site-applied

G10/635 Thermally sprayed zinc coating plus site-applied

G10/638 Shop priming

G10/640 Shop painting

G10/643 Protective painting

G10/65 Shop priming for

G10/650 Site painting

G10/660 Shop plus site painting

G12/20 Shop priming

G12/30 Proprietary

G12/330 Proprietary metal members

G12/650 Shop priming

Specification data - Powder coatings

Product Reference

Intercure® 200HS

Colour

Grey

Red

Sand

Contractor's choice

Product Options

Technical data:

  • Gloss level: Matt.
  • Typical thickness: 150–200 microns dry; 188–250 microns wet.

Compatibility:

Intercure 200HS will normally be applied to suitably prepared steel, e.g. blast cleaned. However, if necessary, application over prefabrication blast primers can be performed. Consult International Protective Coatings for further details. Recommended topcoats/ intermediates are:

  • Intercure 420HS.
  • Interfine 629HS.
  • Interfine 878.
  • Interfine 979.
  • Intergard 345.
  • Intergard 410.
  • Intergard 475HS.
  • Intergard 740.
  • Interseal 670HS.
  • Interthane 870.
  • Interthane 990.
  • Interzone 505.
  • Interzone 954.
  • Interzone 1000.

For other suitable topcoats/intermediates, consult International Protective Coatings.

Similar products from International®, brand of AkzoNobel