NBS Source
I'm a manufacturer
Compare variants

Unleaded Inter-loc Horizontal Cavity Trays

Verified by manufacturer 5 months ago

IL4 four-brick-long horizontal cavity tray, new build applications

Timloc Building Products Variant:

Preformed horizontal cavity tray system for new build and existing walls.

Jump to:
+44 (0)1405 765567 Website

Application

  • At the abutment of a flat roof with a cavity wall.
  • At the abutment of a lean-to or mono pitch roof with a cavity wall.
  • Over concrete ring beams.
  • Over airbricks, cavity liners, ducts, meter boxes, etc.
  • On external walls (not exceeding 102.5 mm in thickness) built from standard brickwork, blockwork or stone.
  • Clear cavity widths of 50–125 mm.

Description

Preformed horizontal cavity tray system for new build and existing walls.


Features and benefits:

  • Fits all clear cavity sizes up to 125 mm.
  • Suitable for brick, block and stone wall construction (cutting of masonry may be required).
  • 150 mm-high back upstand exceeds minimum requirements of NHBC.
  • Angled section between cavity.
  • Interlocking mechanism for joining tray lengths to eliminate tray jointing.
  • Built to brick bonding lengths for ease of use.
  • Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.
  • Built independent to the inner leaf will enable inner and outer leafs to be built independently, if required.
  • Available in two lengths: four-brick for general use and two-brick for reducing waste when making up a run of cavity tray to the required length.
  • Can be specified separately with a pre-applied polystyrene strip mortar barrier.


Quality:

  • Satisfies all NHBC requirements.
  • Manufactured to BS EN ISO 9001 and BS EN ISO 14001.
  • Complies with all relevant Building Regulations.
  • Meets all relevant British Standards.

General information

Color

Black

Material

Polypropylene (PE)

Uniclass

Pr_25_57_21_66 Preformed cavity traysPrimary

CAWS

F30/370 Preformed cavity trays

F30/56 Preformed cavity trays

Specification data - Preformed cavity trays

Material

Polypropylene (PE).

To fit cavity width

50–125 mm.

Height

150 mm.

Length (effective)

900 mm (four bricks).

Accessories

None.

Ext 09 - external 90° corner.

Guidance for specification option:

Effective length: 220 mm (one brick).

Int 09 - internal 90° corner.

Guidance for specification option:

Effective length: 220 mm (one brick).

Ext 135 - external 135° corner.

Guidance for specification option:

Effective length: 330 mm.

Int 135 - internal 135° corner.

Guidance for specification option:

Effective length: 330 mm.

SERH - Stopend, right handed.

SELH - Stopend, left handed.

Similar products from Timloc Building Products

Lintel Stop End

Lintel Stop End

Unleaded Everdry Stepped Cavity Trays for Blockwork

Unleaded Everdry Stepped Cavity Trays for Blockwork

Unleaded Everdry Stepped Cavity Trays for Brickwork

Unleaded Everdry Stepped Cavity Trays for Brickwork

Unleaded Everdry Stepped Cavity Trays for Stonework

Unleaded Everdry Stepped Cavity Trays for Stonework

Unleaded System 2000  Horizontal Cavity Trays

Unleaded System 2000 Horizontal Cavity Trays