NBS Source
List your products
Description

Inter-loc is a pre-formed horizontal cavity tray system for new build and existing external leaf masonry construction generally not exceeding 103 mm thick, and for cavity widths of between 50 mm and 125 mm.

Features:

  • Project specification and scheduling service available.
  • 150 mm high back upstand.
  • Low profile lapped joint between sections allows any length of brick, block or stone to be used without difficulty.
  • Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.
  • Suitable for brick, block and stone wall construction (cutting of masonry may be required).
  • Interlocking mechanism for joining tray lengths eliminates tray jointing.
  • Cavity tray builds into the outer leaf only to speed up installation to allow both inner and outer leafs to be built independently if required.

General information
Features

Project specification and scheduling service available

150 mm high back upstand

Low profile lapped joint between sections allows any length of brick, block or stone to be used without difficulty

Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf

Suitable for brick, block and stone wall construction (cutting of masonry may be required)

Interlocking mechanism for joining tray lengths eliminates tray jointing

Cavity tray builds into the outer leaf only to speed up installation to allow both inner and outer leafs to be built independently if required

Material

2 mm thick polyethylene

Uniclass 2015
Preformed cavity trays (Pr_25_57_21_66)Primary
Specification data - Preformed cavity trays
Product Reference

Inter-loc Cavity Tray

Location

As shown on drawings

Cavity width

___ mm

Within range 50 mm to 125 mm.

Horizontal tray product code

Inter-loc 2

2 brick effective length - for new build.

Inter-loc 2 (E)

2 brick effective length - for existing build.

Inter-loc 4

4 brick effective length - for new build.

External Corner, product code

Not required

Ext 90

90°, 2/4 brick effective length - for new build.

Ext 90 (E)

90°, 2/4 brick effective length - for existing build.

Ext 135

135°, effective length 330 mm - for new build.

Ext 135 (E)

135°, effective length 330 mm - for existing build.

Internal Corner, product code

Not required

Int 90

90°, 2/4 brick effective length - for new build.

Int 90 (E)

90°, 2/4 brick effective length - for existing build.

Int 135

135°, effective length 330 mm - for new build.

Int 135 (E)

135°, effective length 330 mm - for existing build.

Stopend, product code

SELH

Left hand - for new build.

SERH

Right hand - for new build.

Standard product features

External masonry leaf thickness:

103 mm.

Material:

2 mm thick polyethylene.

Colour:

Black.

Similar products from Timloc Building Products