Compare

Instanta HS001 Instant On Wall Boiling Water Heater - Water Dispenser

Name: Instanta HS001 Instant On Wall Boiling Water Heater - Water Dispenser
Brand: Zip Water
SKU: epLzSWpJFNfmUqQFRV1byA

Verified by manufacturer 2 months ago

Third party certifications:

On-wall boiling water heater, 1.5 L capacity.

Jump to:

Application

Suitable for commercial applications in catering environments.

1.5 L Instant on-wall boiling water heater (in white).

Features and benefits:

External status light to show when product is heating up and ready to use.
Stainless steel insulated heating chamber to ensure high performance and minimal heat loss.
Basic fault self-diagnostic system and duel safety protection against overfilling.
Built using high quality materials and parts including heavy duty non drip taps.
Easy access for service and cleaning to help prolong products lifespan.

Color	White
Finish	Powder-coated
Material	Steel Stainless steel
Shape	Rectangle
Length	165 mm
Width	275 mm
Height	336 mm
Warranty description	Two year Guidance for specification option: For parts and labour.

Uniclass	Pr_40_70_23_42 Instant boiling and cold water tapsPrimary

Product range	On Wall Boiling

Third-party certification	EMC Tested and Certified to BS standards EN 55014 and EN 61000. Guidance for specification option: Electrical Safety Tested - self-certified to BS standard EN 60335-1 and 2.
Water	Boiling.
Duty	-
Tank capacity	1.5 L.
Dimensions	275 x 165 x 336 mm. Guidance for specification option: Packed dimensions: 370 x 270 x 430. Tap protrusion: 90 mm. Manufacturer guidance (width x depth x height) (of unit):
Electrical connection	-
Power	1.5 kW. Guidance for specification option: Electrical supply: single-phase, N & E (minimum break rating of 13 amp required). Electrical connection: Wire into double-pole fused spare (minimum cable size: 1.5 mm²). Use of an ELCB is recommended.
Voltage	230 V. Guidance for specification option: (50-60 Hz.)
Water inlet	3/4" BSP. 15 mm push-fit.
Safety features	Over-boil and boil-dry protection and safety protection against overfilling. Guidance for specification option: External status light shows when product is heating up and ready to use (red light shows ‘Heating’, and green light shows ‘Ready’). Basic fault diagnosis system – status light flashes. Easy access for service and cleaning helps to prolong product lifespan.
Components	Tank-baffle plates. Guidance for specification option: Unique design aids heat recovery and reduces steam emissions to atmosphere.

Type:	Wall-mounted.
Unit weight	6.1 kg. Guidance for specification option: (when empty.)
Weight	9.9 kg. Guidance for specification option: (when full.) Packed weight: 7.2 kg.
WaterPressureRange	2-5 bar. Guidance for specification option: (28-70 psi.)
Overflow	15 mm push-fit. Guidance for specification option: (extend if required: pipework to have a continuous fall.)
Construction	Guidance for specification option: Outer fabrication (body) construction: Steel, powder coated in white. Tank construction: 304 and 316 grade stainless steel insulated heating chamber to ensure high performance and minimal heat loss. Tank wall thickness: 0.9 mm. Built using high quality materials and parts: Including heavy-duty non-drip tap.
Performance:	Guidance for specification option: Water temperature delivered: 96°C (default) – can be adjusted if required. Heat up time to working temperature: 15 minutes (full tank capacity). Output per hour (at default temperature setting): 15 L (higher output per hour if set at lower temperature). Rapid draw-off: 1.5 L. Recovery per minute: 0.25 L. Stand-by power loss (idle mode): 0.03 kW/h.