Application

use OT301 for creating airtight joints between illbruck ME003 vapour barrier and structural elements, airtightness membranes, wall-lining membranes of all kinds and for bonding wind-tight joints between sub-roof and roof-lining membranes. A permanent bond is achieved on all illbruck membranes, polyethylene (PE), polyamide (PA), polypropylene (PP), and aluminium foil is used to create an airtight seal.

Joints are possible on mineral substrates, on planed and painted wood, high-density plastic and non-rusting metal (e.g. pipes, windows, etc.), and hardboard (particleboard, oriented strand board – OSB, veneer plywood and medium-density fibreboard – MDF).

Description

A dispersion adhesive based on acrylic copolymers and ethanol, free from plasticizers and halogens.

Features and benefits:

  • Very high, permanent adhesion.
  • Quick-drying.
  • Wood to wood products.
  • No pressure lath is required on loadbearing substrates.
  • Very elastic; permanently flexible.
  • Can be applied in low temperatures, and is suitable for permanent use in very wide temperature range.
  • Can be stored in very low temperatures.

Applications:

use OT301 for creating airtight joints between illbruck ME003 vapour barrier and structural elements, airtightness membranes, wall-lining membranes of all kinds and for bonding wind-tight joints between sub-roof and roof-lining membranes. A permanent bond is achieved on all illbruck membranes, polyethylene (PE), polyamide (PA), polypropylene (PP), and aluminium foil is used to create an airtight seal.

Joints are possible on mineral substrates, on planed and painted wood, high-density plastic and non-rusting metal (e.g. pipes, windows, etc.), and hardboard (particleboard, oriented strand board – OSB, veneer plywood and medium-density fibreboard – MDF).

General information

Uniclass 2015

Pr_20_31_02_03 Acrylic and methacrylate adhesivesPrimary

CAWS

H92/780 Air and vapour control layer

P10/310 Air and vapour control layer

P10/60 Air and vapour control layer

Specification data - Acrylic and methacrylate adhesives

Product Reference

OT301 Endurance Adhesive

Standard product features

Colour:

Green.

Technical characteristics:

  • Density: 1.2 g/cm³ (approximately).
  • Application temperature: -10°C to + 50°C.
  • Temperature resistance: permanent -20°C to +80°C.
  • Curing time: two to three days, depending on substrate, membrane and humidity.