NBS Source
I'm a manufacturer

illbruck FM330 Pro Foam Airseal

Verified by manufacturer 5 months ago

illbruck – a brand of Tremco CPG UK Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

A single component, elastic formula low post expansion gun grade polyurethane foam for airtight and insulated joint sealing.

Jump to:
+44 (0)1942 251400 Website

Application

Filling the joints between window and door frames and the structural opening, top of wall joints, beam to roof joints, wall to roof joints and service penetrations. Internal use shielded from UV exposure, external applications require a top coat. Permissible in Relevant Buildings where small amounts of insulation worse than Class A1/A2 Reaction to Fire are required to prevent cold bridging.


Note:

Foam has low post-application expansion. Regulate the flow of the dispensing gun. Do not overfill joints to avoid cutting back. Fill to approximately 70% capacity and allow to expand. A mild mist of water spray applied to the joint can expedite expansion. Clean overspill and tooling with Acetone.

Description

A high movement accommodation factor (MAF) of 50% ensures that the integrity of the seal is maintained during any movement and settlement. FM330 Profoam Air Seal provides thermal and acoustic insulation within linear construction joints typically around window and door perimeters. The foam is permanently soft and flexible after curing. FM330 Profoam Air Seal can assist with driving rain resistance of up to 600 Pa* as part of the illbruck BBA Accredited i3 System when used in conjunction with illbruck impregnated expanding foam tapes and various illbruck internal or external perimeter sealing membranes.

General information

Color

White

Material

Polyurethane

Guidance for specification option:

Single component Polyurethane.

Shape

Formless

Warranty description

Guidance for specification option:

Any product which has been applied (a) in accordance with Tremco CPG UK Ltd written instructions and (b) in any applications recommended by Tremco CPG UK Ltd, but which is proved to be defective, will be replaced free of charge.

Uniclass

Pr_30_31_76_66 Polyurethane (PUR) expanding foam fillersPrimary

CAWS

L20/820 Sealant joints

L20/80 Sealant joints

L10/75 Sealant joints

L10/810 Sealant joints

Product range

i3 - 3 level sealing system

Specification data - Polyurethane (PUR) expanding foam fillers

Material

Single component polyurethane.

Colour

White.

Execution

-

Manufacturer guidance

In strict accordance with the Manufacturers Technical Data Sheets and method statements.

Form

Fast curing, permanently elastic.

Package

12 x 750 ml cans per box.

Reaction to fire

To BS EN 13501-1, Class E.

Curing time

Tack free after 10 minutes, fully cured after 45 minutes.

Guidance for specification option:

  • Curing system: moisture curing.
  • Cutting time 45 minutes.

Air permeability

To EN 1026, <0.1 m³/m² hr at 600 Pa (longitudinal joints).

Guidance for specification option:

When used as part of the illbruck i3 system.

Weather resistance

To EN1027 and DIN EN 12208 (class 9 A) at 600 Pa.

Guidance for specification option:

When used as part of the illbruck i3 system.

ThermalConductivity

To EN 12667, 0.036 W/m.K.

UV resistance

Limited when used externally - requires a top covering/coat.

Sound insulation

Up to 60 dB.

Application temperature

+5°C to +30°C.

Temperature resistance

-20°C to +80°C.

Certification

British Board of Agrement Certificate 12/4891.

Guidance for specification option:

 (i3 System).

Storage

>12 months in cool dry conditions.

Fire classification

To DIN 4102-1, B3.

Typical yield

34 litres.

Water absorption

To EN 1609, 0.2 kg/m².

Density

15–25 kg/m³.

Air tightness

To EN 12114, <0.1 m³/(h.m) at ±1750 Pa.

Movement

50%.

Compressive Strength (at 10% deformation)

11 kPa.

Elongation at break

50%.

AcousticRating

To EN ISO 140-1:2005-03, 63 dB.

Service temperature

Short term: -40°C to +130°C. Long term:-40°C to +90°C.

Shelf life

24 months when stored as recommended in original unopened containers.

Accessories

Not required.

illbruck dispensing gun.

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

BBA Certificate Full i3 System