IKO Two Way Detail Outlets

Application

Designed for applications where an angle is formed by the intersection of vertical and horizontal surfaces (for example, where a balcony or roof meets a parapet wall). They can be installed to provide either vertical or horizontal run-off and are suitable for use with most types of waterproofing membrane.

Description

Two way detail outlets which have a female socket with parallel thread to BS EN 10226-1 for direct connection to threaded tube conforming with BS EN 10226-1. Supplied with BS EN 10255 taper male thread which ensures a completely watertight joint when screwed home into the socket outlet.

Screw outlets are recommended where a connection to the outlet occurs within the thickness of a concrete slab. In such cases a threaded connection, achieved by use of an IKO Roof Threaded Spigot Adaptor, will create a completely gas-tight seal within the slab. The outlets can be connected to socketed and socketless cast iron pipework, high density polyethylene (HDPE) pipework and polyvinyl chrloride (PVC) pipework by means of the IKO Roof Threaded Spigot Adaptor with appropriate IKO coupling.

Regular Two Way:

Designed for use in many applications, the sump is compact yet provides adequate drainage for most parapet applications, it has three outlet options in 2”, 3”, and 4” BSP thread.

Accessories:

- Threaded Spigot Adaptors:

  • Designed to facilitate the connection of IKO Roof AV and Detail Threaded Aluminium Rainwater Outlets to all types of pipe systems, and presents an economic alternative to using a short length of steel gas tube to BS EN 10255 in the case of cast iron socketed or socketless systems.
  • Manufactured from acrylonitrile butadiene styrene (ABS) plastic and supplied in 400 mm lengths with a taper thread externally at one end to BS EN 10226-1 and chamfered at the other end to BS 4514 and BS EN 1329-1 spigot dimensions. Sizes are available to suit 50, 75, 100 and 150 mm nominal bore pipework.
  • The adaptor is screwed into the base of the outlet using a polytetrafluoroethylene (PTFE) tape or silicone sealant to obtain a gas-tight seal. The spigot end of the adaptor can then be connected to the pipe socket. If necessary, the length of the spigot end of the adaptor can be reduced by cutting as required with a fine toothed saw.

Applications:

Designed for applications where an angle is formed by the intersection of vertical and horizontal surfaces (for example, where a balcony or roof meets a parapet wall). They can be installed to provide either vertical or horizontal run-off and are suitable for use with most types of waterproofing membrane.

General information

CAWS

R10/26 Proprietary rainwater outlets

R10/365 Proprietary rainwater outlets

Product range

Roofing Ancillaries

Specification data

Product Reference

IKO Two Way Detail Outlets

Outlet size

100 mm

Flow rate: 6 L/s (vertical), 2.05 L/s (horizontal).

Accessories

None

Threaded spigot adaptor 2ADP

50 mm outlet size.

Threaded spigot adaptor 3ADP

75 mm outlet size.

Threaded spigot adaptor 4ADP

100 mm outlet size.

Threaded spigot adaptor 6ADP

150 mm outlet size.

Literature

Flat Roofing Design Guide

Flat Roofing Design Guide

Similar products from IKO PLC

Hyload Jointing Tape No. 3

Hyload Jointing Tape No. 3

IKO AV Retro-Gulley Outlets

IKO AV Retro-Gulley Outlets

IKO AV Vertical Rainwater Outlets

IKO AV Vertical Rainwater Outlets

IKO Easy Flow Rainwater Outlet System

IKO Easy Flow Rainwater Outlet System

IKO Polimar FCS Catalyst

IKO Polimar FCS Catalyst

IKO Polimar FCS Flow Resistant Additive

IKO Polimar FCS Flow Resistant Additive

IKO Roof Balcony Outlets

IKO Roof Balcony Outlets

IKO Slate

IKO Slate

IKO Trendy Rainwater Outlet System

IKO Trendy Rainwater Outlet System

PVC Box Scupper Outlet

PVC Box Scupper Outlet