NBS Source
I'm a manufacturer

Fast Curing Cold Applied Liquid System for Warm Roofs - IKO Polimar FCS

Verified by manufacturer 5 months ago

IKO PLC

Two-component polymethyl methacrylate (PMMA)-based waterproofing resin system.

Jump to:
+44 (0)1257 255 771 Website

Application

Warm flat roof constructions.

Description

Two-component polymethyl methacrylate (PMMA)-based waterproofing resin. Requires mixing with IKO Polimar FCS (Fast Curing System) Catalyst before use - consult manufacturer for details.


Features and benefits:

  • Each layer will cure in approximately 20 minutes for an easy, quick application.
  • Provides seamless waterproofing of all areas, including complex upstands.
  • Highly flexible and crack-bridging, even in extreme cold temperatures.
  • Permanently weather-resistant (high and low temperatures, UV rays, hydrolysis).
  • Fall to achive 1:80.
  • Rot and root resistant (FLL tested and approved).
  • Up to 20-year guarantee (up to 25 year with sealer coat).
  • Fire Performance EXT.F.AC in accordance with BS 476-3.
  • BBA Agrément Certificate 14/5178.
  • NHBC Accepted.

General information

Color

Grey

Material

Polymethyl methacrylate (PMMA)

Length

Bespoke

Width

Bespoke

Warranty description

20 year

Uniclass

Ss_30_40_30_43 Liquid-applied warm roof covering systemsPrimary

CAWS

J31/10 Warm deck roof coating

J31/120 Warm deck roof coating

J31/353 Waterproof coating

Specification data - Liquid-applied warm roof covering systems

Preparation

-

Horizontal work

IKOpro Bonding Agent.

Guidance for specification option:

IKOpro Systems Bonding Agent (black) is a specially formulated primer. Enhancing the properties of self- adhesive bitumen roofing membranes, it promotes strong bonds even at temperatures as low as 5°C.

IKOpro Sprayfast MPP.

Guidance for specification option:

KOpro Sprayfast MPP (Black, Multipurpose Primer) is a

specially formulated high performance bonding primer.

It allows the speed of application of the bonding primer

to be five times faster than conventional bitumen primers,

promoting strong bonds at temperatures as low as

5°C. For self adhesive and torch applied bitumen membranes.

IKOpro Quick Dry Primer.

Guidance for specification option:

IKOpro Quick Dry Bitumen Primer (black) is a fast-drying bitumen priming solution for torch applied bitumen membranes.

IKO Polimar FCS Asphalt & Bitumen Primer.

Guidance for specification option:

IKO Polimar FCS Asphalt & Bitumen Primer is a 2- component, fast curing PMMA-based resin primer for use on bitumen and asphalt substrates in preparation for the application of IKO Polimar FCS system.

IKO Polimar FCS Concrete Primer.

Guidance for specification option:

IKO Polimar FCS Bitumen Primer is a fast curing PMMA-based primer on absorbent substrates in preparation for the application of IKO Polimar FCS system.

Skirtings and vertical work

IKOpro Bonding Agent.

Guidance for specification option:

for self adhesive bitumen membranes only

IKOpro Sprayfast MPP.

Guidance for specification option:

for self adhesive and torch applied bitumen membranes

IKOpro Quick Dry Primer.

Guidance for specification option:

for torch applied bitumen membranes

IKO Polimar FCS Asphalt & Bitumen Primer.

Guidance for specification option:

For priming and as a barrier coat on asphalt and bitumen substrates.

IKO Polimar FCS Concrete Primer.

Guidance for specification option:

For the priming of absorbent substrates such as concrete, screed and timber.

Air and vapour control layer

IKO Ultra S-A Air and Vapour Control Layer.

Guidance for specification option:

Self adhesive for combustible substrates


S-A VCL (Self-Adhesive) is a high performance vapour barrier for use in adhered IKO Polymeric systems. It is composed of a polyester reinforced aluminium core, coated with a rubber modified, self-adhesive bitumen coating. The membrane is protected on the underside with a release film backing and coated on the top surface with a fine mineral finish. A selvedge of 75mm width, protected with release film, provides a quick means of completing side laps.

IKO Ultra T-O Air and Vapour Control Layer.

Guidance for specification option:

Torch applied to non combustible substrates only


T-O VCL (Torch-on) is a high performance vapour control layer for use in adhered IKO Polymeric systems. It comprises an impervious aluminium core, reinforced with polyester and coated with a specially formulated quick melt SBS modified bitumen. The lower surface has a sacrificial film which rapidly melts during the torching operation.

Insulation

-

Type

IKO enertherm Gold Insulation, 2400 x 1200 mm.

Guidance for specification option:

Thickness: 30, 50, 60, 80, 100, 120, 140, 150 mm. Consult literature and insert requirements.

IKO enertherm Gold Insulation, 1200 x 1200 mm.

Guidance for specification option:

Thickness: 30, 40, 50, 70, 80, 100, 120,140 mm. Consult literature and insert requirements.

Manufacturer guidance

IKO enertherm GOLD is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This high-quality rooftop insulation consists of no fewer than seven layers, combined into a single complex. It is tested under extreme conditions in respect of water absorption, mechanical properties, corrosion resistance and emissivity. 

Fixing

IKOpro PU bonding adhesive.

IKOpro Sprayfast IBA.

Carrier membrane

-

Type

IKO Ultra H-A Underlay.

Guidance for specification option:

IKO Systems H-A underlays are polyester reinforced bitumen membranes used as underlays within a built up roofing system, The membranes are coated on both sides with self-adhesive bitumen SBS elastomeric coating. They have a fine mineral upper surface with a 75 mm release film selvedge to facilitate rapid installation of lap joints. Size: 1 x 16 m.

Liquid-applied waterproofing

-

Type

IKO Polimar FCS Waterproofing reinforced with IKO 110 sgm Polyester Fleece.

Guidance for specification option:

Polyester fleece: White, 1.05 x 50 m.

Surface treatment

IKO Polimar FCS Sealer coat, RAL 7032.

Guidance for specification option:

Optional and required for 25 year applications.

IKO Polimar FCS Sealer coat, RAL 7030.

IKO Polimar FCS Sealer coat, RAL 7043.

Manufacturer guidance

KO Polimar FCS (Fast Curing System) Sealer Coat is a flexible, UV-stabilized, two-component pigmented surface sealant, based on polymethyl methacrylate.

Storage

Store products sealed in their original airtight container and in a cool, dry and frost-free place.

Guidance for specification option:

The unopened product has a shelf life of at least 6 months after

delivery. Direct sunlight on the containers should be avoided, including on site.

Application temperature

Application can proceed when the air temperature is between +3°C and +35°C.

Similar products from IKO PLC

Cold Applied Liquid System for Car Park Decks - IKO Polimar FCS

Cold Applied Liquid System for Car Park Decks - IKO Polimar FCS

Cold Applied Liquid System for Car Park Ramps - IKO Polimar FCS

Cold Applied Liquid System for Car Park Ramps - IKO Polimar FCS

Fast Curing Cold Applied Liquid System for Car Parks - IKO Polimar FCS

Fast Curing Cold Applied Liquid System for Car Parks - IKO Polimar FCS

Fast Curing Cold Applied Liquid System for Cold Roofs  - IKO Polimar FCS

Fast Curing Cold Applied Liquid System for Cold Roofs - IKO Polimar FCS

IKO Tanetech R EC/UV - Single-Component Cold Applied Liquid System for Flat and Pitched Roofs  - Flat roof system

IKO Tanetech R EC/UV - Single-Component Cold Applied Liquid System for Flat and Pitched Roofs - Flat roof system

Single Component Cold Applied Liquid System for Warm Roofs - IKO Hybritech 1K PU - Waterproofing system

Two-Component Cold Applied Liquid System for Roofs, Balconies and Car Parks - IKO Metatech - Liquid Applied Waterproofing

Two-Component Cold Applied Liquid System for Roofs, Balconies and Car Parks - IKO Metatech - Liquid Applied Waterproofing