i-SIP 162

Thickness:

162 mm.

Materials:

• 11 mm OSB3 facing.

• 140 mm C24 CLS timber.

• 140 mm EPS 100E low lambda.

Weight:

Approximately 20 kg/m² (based on 5% timber content).

Fire:

When finished with the requisite plasterboard lining system, the panel can achieve 30, 60 or 90 minutes fire resistance.

Acoustic:

When finished with the requisite plasterboard lining system, the panel can achieve Rw+Ctr of at least 53 dB in a cavity party wall and 51 dB externally with brick cladding.

Cladding:

The panel system is suitable for all types of cladding systems and cavity constructions. Where the cladding system is mounted on the panel, loads should not exceed 20 kg/m² unless the fixing system is approved by Innovaré.

Thermal:

• Low lambda core (0.031 W/mK).

• Typical wall build up U-value: 0.19 W/m²K.

Structure:

• Permanent term axial strength: 39 kN/m.

• Permanent term bending strength: 14.9 kN/m.

• Racking resistance: 2.55 kN/m.

• Additional C24 grade timber elements installed within the panel as required.

Detailing:

Butt-jointed at corners and fixed with 200 mm screw. In line joints connect with timber spline. i-SIPs are suitable for load bearing structures up to four storeys and infill or cladding structures up to 18 m. i-SIPs are suitable for roofs above 12.5° subject to loading and support conditions.