Hyload Original DPC

Hyload Original DPC

IKO PLC Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

High performance flexible polymeric damp-proof course (DPC) for use within masonry walls.

Jump to:
+44 (0)1257 255 771 www.ikogroup.co.uk

Application

For use as a horizontal, vertical or stepped damp proof coursing system and is also suitable for the on-site creation of cavity trays within masonry cavity wall construction.

Description

High performance flexible polymeric damp-proof course (DPC) for use within masonry walls to prevent passage of moisture from the ground and at all levels as a cavity tray to prevent the downward movement of water.

Features and benefits:

  • Available in a range of widths.
  • Does not extrude under compressive load, under normal working conditions.
  • Robust – resistant to impact damage, under normal working conditions.
  • Durable – will remain effective for the design life of the building, under normal working conditions.
  • Supported by a range of accessories and is compatible with the complete range of Hyload damp-proofing products, as well as most commonly used construction materials.
  • CE Marked.
  • BBA approved.

Applications:

For use as a horizontal, vertical or stepped damp proof coursing system and is also suitable for the on-site creation of cavity trays within masonry cavity wall construction.

General information

Uniclass 2015

Pr_25_57_21_64 Polypropylene (PP) damp-proof courses and cavity traysPrimary

CAWS

F30/320 Damp proof courses – plastics

F30/345 Site formed flexible sheet cavity trays – plastics

F30/46 Damp proof course – plastics

F30/52 Site formed flexible sheet cavity trays

Specification data - Polypropylene (PP) damp-proof courses and cavity trays

Product Reference

Hyload Original DPC

Roll width

Insert requirements; available in widths 100–1000 mm.

Pre-formed cloak units

Not required

Type 2, change of level (right-hand unit)

Type 3, stop end brick/ block, surface fixed (right-hand unit)

Type 5, internal corner, surface fixed

Type 6, external corner, surface fixed

Type 7, internal/ external corner brick/ block

Type 8, internal corner

Type 9, external corner

Type 10, column stop end brick/ block, surface fixed (right-hand unit)

Accessories

Not required

Hyload DPC fixing pins for insulation

Hyload DPC fixing pins for masonry

Hyload DPC fixing strip

Hyload DPC jointing tape

Hyload DPC lap adhesive

Hyload DPC joint support board

Hyload DPC mastic

Standard product features

Technical characteristics:

  • Colour: Black.
  • Nominal weight: 1.85 kg/m².
  • Nominal thickness: 1.25 mm.
  • Roll length: 20 m.
  • Water tightness (to EN 1928):
  • 2 kPa for 24 hours.
  • Maximum tensile force (to EN 12311-1): ≥3 MPa.
  • Elongation (to EN12311-1): ≥110%.
  • Resistance to static loading (to EN 12730 (B)): Concrete: 20 kg; expanded polystyrene (EPS): 5 kg.
  • Resistance to impact (to EN 12691): Aluminium: 500 mm; EPS: 150 mm.
  • Resistance to tearing (to EN 12310-1): Long ≥8.63 N/mm.
  • Flexibility at low temperature (to EN 1109): ≥-15°C.
  • Characteristic flexural strength (to DD 86-1: 1983): 0.13 Nmm².
  • Durability – ageing (to EN 1296): Pass.
  • Durability – alkali (Annex C): Pass.

Product Options

Roll width:

Non-standard widths are available to order in 25 mm increments.

Accessories:

- Hyload DPC fixing pins for insulation:

Corrosion-resistant rigid plastic strip, used specifically to provide surface fixing solutions in cavity tray formation. 29 mm wide x 2 mm thick x 2 m long.

- Hyload DPC fixing pins for masonry:

Corrosion-resistant pins for surface fixing IKO Hyload high performance DPC systems to any solid internal substrate such as brick, stone and concrete.

- Hyload DPC fixing strip:

Corrosion-resistant and can be used for surface fixing to the rigid insulation of composite inner skins.

- Hyload DPC joint support board:

Twin-walled polypropylene reinforced support board which can be bent to form the required profile.

- Hyload DPC jointing tape:

Black, double-sided bituminous tape in 100 mm x 10 m rolls, used for bonding overlaps in DPC material and DPC to IKO Hyload pre-formed cloak units.

- Hyload DPC lap adhesive:

Brush applied synthetic rubber resin mixture for bonding laps in DPC or DPC to IKO Hyload pre-formed cloak units.

- Hyload DPC mastic:

Thick synthetic rubber mastic adhesive with gap filling properties up to 6 mm.

Literature

Third party certifications

Similar products from IKO PLC