NBS Source
I'm a manufacturer

Premcrete Hydroprufe LG - Liquid Gas Membrane

Verified by manufacturer 4 days ago

Premcrete

Liquid gas membrane.

Jump to:
+44 (0) 23 80276166 Website

Application

Horizontal substrates, such as pile caps, require a single one-coat application at a minimum WFT (Wet Film Thickness) of 1 mm. Vertical substrates should have two coats applied.

Hydroprufe LG should be applied using a suitable brush, roller, or airless spray equipment and where a mechanical key is required to promote adhesion to subsequently cast concrete, then a quartz aggregate should be broadcast into the wet coating. Once the coating has dried, then the excess aggregate should be swept or blown from the surface.

Description

HYDROPRUFE LG is an epoxy based liquid gas membrane which is suitable for application to porous substrates to provide resistance to ground gases including methane and carbon dioxide. It is supplied as two-component pack, consisting of a base component and a curing agent suitable for mixing on site.

When applied to the substrate it will also act as an adhesion promoter. The liquid applied membrane cures to form a resilient gas and VOC barrier, which is also resistant to water and ground moisture.

General information

Color

Red

Finish

Epoxy

Material

Epoxy

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

25 year

Uniclass

Pr_35_31_68_17 Cold-applied polymer-modified bitumen waterproof coatingsPrimary

CAWS

J30/10 Cold-applied damp-proofing

J30/130 Cold-applied damp-proofing

Product range

Gas Coatings

Specification data - Cold-applied polymer-modified bitumen waterproof coatings

Modifier

Polymer modified.

Curing time

24 hours (at 20°C).

Methane transmission rate

30 ml/M²/day.

Elongation at break

100%.

Water resistance

0.6 bar.

Adhesion to concrete

1 N/mm².

Application temperature

5–30°C.

Literature

Technical Datasheet

Technical Datasheet

Hydroprufe LG TDS

Hydroprufe LG TDS