HS Grating Fencing

Name: HS Grating Fencing
Brand: jNPTBSDNacdDyrmeUu9vMb
SKU: kr6NQTifz6pNTr46z8jKAU

Lang+Fulton

The HS range of steel grating fences incorporate features designed for higher security applications.

Jump to:

+44 (0)131 441 1255 www.langandfulton.co.uk

Finish

Hot dip galvanized

To BS EN ISO 1461.

Hot dip galvanized and polyester powder coated

Insert RAL or BS colour to BS EN ISO 1461 and BS 1722–16.

Material

Electrofused steel S235JR

Uniclass 2015

Ss_25_14_63_11 Carbon steel continuous bar fencing systemsPrimary

CAWS

Q40/125 Open mesh steel panel general purpose fencing

Q40/126 Open mesh steel panel security fencing

Q40/27 Open mesh steel panel general purpose fencing

Q40/30 Proprietary fencing

Q40/430 Proprietary fencing

Product Reference

Palermo-HS

Roma-4HS

Panel

Panel Type

Roma-4HS

Mesh 63 x 132 mm; vertical flat bar 30 x 4; horizontal round bar 5 mm diameter.

Palermo-HS

Mesh 43 x 44 mm; vertical flat bar 25 x 2; horizontal round bar 5 mm diameter.

Height

1991 mm

Nominal height: 2.0 m (framed and fixed).

2123 mm

Nominal height: 2.2 m (framed and fixed).

2387 mm

Nominal height: 2.4 m (framed and fixed).

2646 mm

Nominal height: 2.7 m (framed and fixed).

2910 mm

Nominal height: 3.0 m (framed and fixed).

Width

1894 mm

Post centres: 1900 mm.

Posts

Corners

80 x 80 mm RSA

For panel heights: 1991, 2123, 2387 or 2646 mm.

100 x 100 mm RSA

For panel height: 2910 mm.

80 x 80 mm SHS

For panel heights: 1991, 2123, 2387 or 2646 mm.

100 x 100 mm SHS

For panel height: 2910 mm.

Two IPE posts

For corners that are not 90 degrees.

Fixing

For anchoring within wall pockets

For ground fixing

Off-set over top of wall

With base plates for fixing to a concrete foundation

Finish

Hot dip galvanized

To BS EN ISO 1461.

Hot dip galvanized and polyester powder coated

Insert RAL or BS colour to BS EN ISO 1461 and BS 1722–16.

Other requirements

None

Shaped to suit non-uniform openings

Rolled to a radius

Accessories

None

450 mm cranked tops for barbed wire

450 mm cranked tops for extension panels

450 x 1863 mm extension panels

Anti-intruder spikes

Standard product features

Material:

Electrofused steel S235JR.

Panel width:

1894 mm (achieves a nominal width of 1900 mm when fixed).

Posts:

- Straight section:

100 x 55 mm IPE – for panel heights: 1991, 2123, 2387, 2646 or 2910 mm.

Fixing:

The two outside flat bars of the grating construction that forms the panel are each three times holed for an M10 x 25 stainless steel dome headed bolt with snap-off security nut. This bolt connects two panels together through the web of the IPE post.

Orientation:

Fences are designed with the round bars set to the inside of the enclosed area.

Installation:

Fastenings: Panels fixed to posts with M10 x 25 mm stainless steel bolts with domed heads and snap-off security nuts, all stainless steel grade A2.

End Panels can be cut to size on site to required or cut to size on site and finish coating made good.

Groundwork: Refer to BS 1722 giving consideration to existing ground conditions. Posts to be set in holes 300 to 400 mm square in plan and between 550 and 700 mm in depth, depending on fence height. Holes should be completely filled to a minimum of 50 mm below ground level with concrete mix (minimum strength of C20).

Height from ground: Panels to sit 100 mm (maximum) off ground.

Changes in level: Fence panels stepped to 150 mm (maximum) on standard length post. Post centres to be reduced for steeper gradients (between 1:20 and 1:7).

Changes in direction: 80 x 80 or 100x100 mm SHS or RSA for 90 degree corner post. Two IPE posts for other angles.

Product Options

Panel:

- Width:

Non-standard widths are available following site survey or may be cut on site.

Posts:

Alternative lengths and style of post:

For ground fixing.

With base plates for fixing to a concrete foundation.

Off-set over top of wall.

For anchoring within wall pockets.

Finishing:

Polyester powder coating is a multi-stage process which applies thermo-setting resins producing a superior finish to painting.

Other requirements:

- Bespoke designs:

The integrity of the grating material allows it to be cut, shaped or rolled to a custom design.

For greater fencing heights, panels can either be stacked or manufactured up to 4000 mm using a heavier section of post.

Finish	Hot dip galvanized To BS EN ISO 1461. Hot dip galvanized and polyester powder coated Insert RAL or BS colour to BS EN ISO 1461 and BS 1722–16.
Material	Electrofused steel S235JR

Product Reference	Palermo-HS Roma-4HS
Panel	-
Panel Type	Roma-4HS Mesh 63 x 132 mm; vertical flat bar 30 x 4; horizontal round bar 5 mm diameter. Palermo-HS Mesh 43 x 44 mm; vertical flat bar 25 x 2; horizontal round bar 5 mm diameter.
Height	1991 mm Nominal height: 2.0 m (framed and fixed). 2123 mm Nominal height: 2.2 m (framed and fixed). 2387 mm Nominal height: 2.4 m (framed and fixed). 2646 mm Nominal height: 2.7 m (framed and fixed). 2910 mm Nominal height: 3.0 m (framed and fixed).
Width	1894 mm Post centres: 1900 mm.
Posts	-
Corners	80 x 80 mm RSA For panel heights: 1991, 2123, 2387 or 2646 mm. 100 x 100 mm RSA For panel height: 2910 mm. 80 x 80 mm SHS For panel heights: 1991, 2123, 2387 or 2646 mm. 100 x 100 mm SHS For panel height: 2910 mm. Two IPE posts For corners that are not 90 degrees.
Fixing	For anchoring within wall pockets For ground fixing Off-set over top of wall With base plates for fixing to a concrete foundation
Finish	Hot dip galvanized To BS EN ISO 1461. Hot dip galvanized and polyester powder coated Insert RAL or BS colour to BS EN ISO 1461 and BS 1722–16.
Other requirements	None Shaped to suit non-uniform openings Rolled to a radius
Accessories	None 450 mm cranked tops for barbed wire 450 mm cranked tops for extension panels 450 x 1863 mm extension panels Anti-intruder spikes

Standard product features	Material: Electrofused steel S235JR. Panel width: 1894 mm (achieves a nominal width of 1900 mm when fixed). Posts: - Straight section: 100 x 55 mm IPE – for panel heights: 1991, 2123, 2387, 2646 or 2910 mm. Fixing: The two outside flat bars of the grating construction that forms the panel are each three times holed for an M10 x 25 stainless steel dome headed bolt with snap-off security nut. This bolt connects two panels together through the web of the IPE post. Orientation: Fences are designed with the round bars set to the inside of the enclosed area. Installation: Fastenings: Panels fixed to posts with M10 x 25 mm stainless steel bolts with domed heads and snap-off security nuts, all stainless steel grade A2. End Panels can be cut to size on site to required or cut to size on site and finish coating made good. Groundwork: Refer to BS 1722 giving consideration to existing ground conditions. Posts to be set in holes 300 to 400 mm square in plan and between 550 and 700 mm in depth, depending on fence height. Holes should be completely filled to a minimum of 50 mm below ground level with concrete mix (minimum strength of C20). Height from ground: Panels to sit 100 mm (maximum) off ground. Changes in level: Fence panels stepped to 150 mm (maximum) on standard length post. Post centres to be reduced for steeper gradients (between 1:20 and 1:7). Changes in direction: 80 x 80 or 100x100 mm SHS or RSA for 90 degree corner post. Two IPE posts for other angles.
Product Options	Panel: - Width: Non-standard widths are available following site survey or may be cut on site. Posts: Alternative lengths and style of post: For ground fixing. With base plates for fixing to a concrete foundation. Off-set over top of wall. For anchoring within wall pockets. Finishing: Polyester powder coating is a multi-stage process which applies thermo-setting resins producing a superior finish to painting. Other requirements: - Bespoke designs: The integrity of the grating material allows it to be cut, shaped or rolled to a custom design. For greater fencing heights, panels can either be stacked or manufactured up to 4000 mm using a heavier section of post.

HS Grating Fencing

Description

General information

Finish

Material

Uniclass 2015

CAWS

Product range

Specification data - Carbon steel continuous bar fencing systems

Product Reference

Palermo-HS

Roma-4HS

Panel

Panel Type

Roma-4HS

Palermo-HS

Height

1991 mm

2123 mm

2387 mm

2646 mm

2910 mm

Width

1894 mm

Posts

Corners

80 x 80 mm RSA

100 x 100 mm RSA

80 x 80 mm SHS

100 x 100 mm SHS

Two IPE posts

Fixing

For anchoring within wall pockets

For ground fixing

Off-set over top of wall

With base plates for fixing to a concrete foundation

Finish

Hot dip galvanized

Hot dip galvanized and polyester powder coated

Other requirements

None

Shaped to suit non-uniform openings

Rolled to a radius

Accessories

None

450 mm cranked tops for barbed wire

450 mm cranked tops for extension panels

450 x 1863 mm extension panels

Anti-intruder spikes

Standard product features

Product Options

Literature

Similar products from Lang+Fulton