NBS Source
Hi-Deck 650®

Application

Suitable for renovations and new construction of commercial and industrial buildings.

Description

Hi-Deck 650® is a large span, continuous roof cladding manufactured from COLORBOND® and ZINCALUME® steels. Some of its features are:

  • Lightweight roofing.
  • Offered in custom and long lengths.
  • Comes in a wide range of COLORBOND® steel colours.

General information

Material

Steel.

Shape

Rectangle.

Size

Sizes are cut to order, dependent on load limit regulations set by local transport authorities.

Uniclass 2015

Pr_25_71_51_89 Steel profiled sheet

Primary

SpecPack

07600 Metal Roofing, Siding and Roof Plumbing

NATSPEC National Classification System

0421 Roofing - combined

0423 Roofing - profiled sheet metal

SpeedSpec

07610 Roofing and Roof Plumbing

Specification data - Steel profiled sheet Enhanced data

Grade

G550.

Coating class

AZ150.

Base Metal thickness (BMT)

Minimum pitch of 1° (1 in 50) is required.

0.42 mm.

Maximum spans:

  • 2500 mm for end span.
  • 2750 mm for internal span.

0.48 mm.

Maximum spans:

  • 3400 mm for end span.
  • 3800 mm for internal span.

Profile

-

Form

Trapezoidal.

Height

50 mm.

Cover width

Sheet width of 725 mm.

650 mm.

Colour

Available in a range of COLORBOND® steel colours.

Comes in standard aluminium colour for ZINCALUME® steel.

-

Material

COLORBOND® steel.

ZINCALUME® steel.

Mass

5.01 kg/m² (0.42 mm COLORBOND® steel).

5.69 kg/m² (0.48 mm COLORBOND® steel).

4.96 kg/m² (0.42 mm ZINCALUME® steel).

5.64 kg/m² (0.48 mm ZINCALUME® steel).

Length

Sizes are cut to order. Recommended maximum runs are 17 m for dark-coloured sheeting and 24 m for light-coloured sheeting.


Allow for a manufacturing tolerance of ±0 to 15 mm.

-

Span

Use in conjunction with Design Notes. Dependent on fastener frequency, span type and support thickness.

600 mm.

900 mm.

1200 mm.

1500 mm.

1800 mm.

Show more

Frame or support

Timber supports.

Use 14 - 10 x 90 mm Hex Head Type 17 with seal as fasteners.

1.2 mm to 3.0 mm BMT steel supports.

Use 12 - 14 x 80 mm Hex Tek® Type 17 with seal as fasteners.

Weather conditions

Contact local manufacturer if to be used within 1 km of industrial, chemical, marine or corrosive environments.

-

Compatibility

Hi-Deck 650® is not compatible with lead, copper, bare metal and some chemically treated timbers.

-

Environmental information

Country of product manufacture

Australia

Literature

Hi-Deck 650 Design Guide

Hi-Deck 650 Design Guide

COLORBOND® Colour Range

COLORBOND® Colour Range