Compare

Hempafire Pro 315 - Intumescent Coating Fire Protection (Solvent Based) - Intumescent Coating Solvent Based 60min

Name: Hempafire Pro 315 - Intumescent Coating Fire Protection (Solvent Based) - Intumescent Coating Solvent Based 60min
Brand: Hempel A/S
SKU: nkdns7H3jwdpQfKfxzF4d8

Verified by manufacturer 2 months ago

Hempel A/S

Third party certifications:

EPD
Certificate type

A one component, solvent-borne, intumescent coating, optimized for 60 minutes for protection of structural steel against cellulosic fires.

Jump to:

+447827 448651 Website

Application

1. As passive fire protection for structural steel in interior and exterior conditions (Up to C4 conditions ISO 12944-2). Suitable for open profile beams and columns, cellular beams and hollow section beams and columns.

2. As a repair and touch up coating for damaged areas of freshly applied Hempafire Pro 315.

Description

To Specify a full Intumescent Fire Protection Coating System C1-C4 (Primer + Intumescent + Topcoat) click on the link below and add to your Chorus Specification:

Intumescent Fire Protection Coating Systems (C1–C4) - C1–C4 Corrosivity & Fire Protection | Hempel A/S | NBS Source (thenbs.com)

To Specify a full Anti-Corrosion System C1-C5 (No Intumescent Fire Protection) (Primer + Topcoat) click on the link below and add to your Chorus Specification :

Anti-Corrosion Protective Coating System (C1–C5) - For Corrosive Environments | Hempel A/S | NBS Source (thenbs.com)

For further advice on Specifications please contact Ian Morton at iam@hempel.com

Hempafire Pro 315

A one component, solvent-borne, intumescent coating, optimized for 60 minutes for protection of structural steel against cellulosic fires.

Features and benefits:

It is suitable for in-shop and on-site applications.
Service temperature:-10°C (14°F) to 50°C (122°F).
Tested and approved according to EN13381-8 and BS 476-21 for up to 90 minutes fire protection.
CE marked product with European Technical Approval ETA 18/0689 according EAD 350405-00-1106.
The product is only available in white, but can be top coated with an approved topcoat in any colour.

Application method:

Airless spray.
Brush.

Drying time:

Determined for dry film thickness 750 micron (30 mils) at standard conditions. Indicative values at 20ºC; Surface dry: 15 minutes, Through-dry: 21 hours.

General information

Color	White Manufacturer guidance 10000/ White.
Finish	Matt
Material	Intumescent
Shape	Formless
Length	Bespoke
Width	Bespoke
Height	Bespoke

Uniclass	Pr_35_31_68_43 Intumescent protective coatingsPrimary
CAWS	M61/170 Off-site coating to galvanized steel M61/150 Off-site coating to unprimed steel M61/160 Off-site coating to primed steel M61/140 On-site overcoating to existing steel M61/120 On-site coating to existing steel M61/115 On-site coating to galvanized steel M61/110 On-site coating to primed steel

Specification data - Intumescent protective coatings

Composition	Solvent-borne.
Colour	10000/ White.

Volume solids	75% ± 3%.
Flash point	23°C (73.4°F).
Specific gravity	1.3 kg/L (11.2 lbs/US gallon).
VOC content	330 g/L (2.7 lbs/US gallon).
Shelf life	12 months, 25°C (77°F).
Standard	CE marked product with European Technical Approval ETA 18/0689 according EAD 350405-00-1106.