Hawa Frontfold 20
Description

Hardware for metal, aluminium or wood folding/ sliding shutters with a panel weight up to 20 kg. Panel width (maximum): 600 mm. Suitable for door panel thickness of 28–36 mm (wood), 28–32 mm (metal/ aluminium).

Features and benefits:

  • Designed for inset or overlay mounting.
  • Shutters can be folded together and placed sideways at an angle of 90°.
  • Can be installed in front of the window or on the exterior of the balcony.
  • The folding stack is installed on one side with pivot bearings.
  • Variants are available for an odd or even number of panels.
  • The folding stack can be pushed sideways against a wall or used free-standing for privacy or protection against wind.
  • When the folding sliding shutters have thickness over 32 mm, the hinge knuckles bearing must be recessed - consult manufacturer for details.
  • Vertical adjustment (±5 mm).

Components:

Quantities of each component will vary dependent on design required - consult manufacturer for details.

  • Top centre trolleys: Two (overlay) or four-wheeled (inlay) trolley with two guide rollers, M8, left or right-hand.
  • Fixed suspension unit, left or right-hand.
  • Centre guide unit, in the middle or on the outside, left or right-hand.
  • Fixed bottom centre guide, left or right-hand.
  • Floor guide units with plate, centre or outer, left or right-hand.
  • Floor guide units without plate, centre or outer, left or right-hand.
  • Fixed floor guide units with plate, left or right-hand.
  • Fixed floor guide units without plate, left or right-hand.

General information

Uniclass 2015

Pr_30_36_36_23 Door track and running gearPrimary

CAWS

P21/10 Quantities and locations

P21/350 Door track and running gear

Specification data - Door track and running gear

Product Reference

Hawa Frontfold 20

Type

Inlay/ inset

Uses bottom guide unit without plate, and centre guide unit.

Overlay

Uses bottom guide unit with plate.

Installation/ Design

As drawing

Insert requirements, various possibilities available. Consult manufacturer for details.

Top track

3500 mm

6000 mm

Cut to size

Insert requirements.

Bottom guide channel

3500 mm

6000 mm

Cut to size

Insert requirements.

Accessories/ Other requirements

Not required

Angle-type strike plate for spring-catch

Cord for spring catch operation on top, including handle and clamp

2000 or 4000 mm, insert requirement.

Drilling jig for hinges and suspension units

Drilling jig for riveting

Hawa spring catch

Can be used for closing and securing folding sliding shutters that open outwards or inwards.

Hinge, stainless steel, grade 1.4404 (316)

Limit stop with setscrew

Snap-lock, aluminium plain anodized

For centre guide units.Threaded pins

Standard product features

Configuration:

Sliding/ folding.

Product Options

Installation/ Design:

Must include the number of panels folding to the right and the number of panels folding to the left. Designs with odd and even numbers of panels are possible. Consult manufacturer for further details.

Top track:

Aluminium, plain anodized, pre-drilled

Bottom guide channel:

Aluminium, plain anodized, undrilled.

Accessories/ Other requirements:

- Hinge, stainless steel, grade 1.4404 (316):

Number of hinges required:

  • Up to 1600 mm: Two
  • 1601–2400 mm: Three.
  • From 2401 mm: Four

Other accessories and spares are also available, consult manufacturer for details.

Similar products from Hawa Sliding Solutions AG