Hawa Centerfold 80 H


Suitable for residential and commercial settings, including:

  • Shopping centres.
  • Airports.
  • Hotels.
  • Restaurants.
  • Banks.
  • Care homes.


Door hardware for large wooden centre folding walls without a bottom guide channel, for panel weights up to 80 kg. Panel width: 500–900 mm. Suitable for door panel thickness of 35–57 mm.

Features and benefits:

  • Quick assembly.
  • Left and right-handed configurations, as well as inwards or outwards-opening installations can all be achieved using the same components.
  • Light and quiet running.
  • A pivot bearing secures the first panel in the set. The other panels line up with the stainless steel hinges that bring the panels closer together and minimize the panel stacking space required.
  • Attached to every other panel is a folding/ pivot door catch with an integrated, individually adjustable retainer, to hold the centre fold wall flush when closed without operating a locking mechanism.
  • A communicating pivot door can be added to the panel stack, or the opposing end - consult manufacturer for details.
  • Has mid-point panel suspension, which means that the installation does not require a bottom guide channel.
  • Hollow cross-section seal strips eliminate the problem of light penetrating through gaps between panels.
  • Choice of locking configurations available.
  • Vertical adjustment (±3 mm).


Quantities of each component will vary dependent on variant specified - consult manufacturer for details.

  • Top pivot bearing.
  • Folding/ pivot door catch, adjustable
  • Four-wheeled trolley, M10, plastic-tyred wheels and suspension plate (19535 only).
  • Four-wheeled trolley, M10, plastic-tyred wheels with suspension plate and spacer (19536 only).
  • Suspension profile, aluminium, 208 mm. Plain anodized, predrilled.
  • Suspension profile, aluminium, 550 mm. Plain anodized, predrilled.
  • Thrust bearing sleeve, 20 mm, including driver.
  • Cover cap for top fixed suspension, plastic anthracite grey RAL 7016.
  • Vertical adjustment key.
  • Suspension assembly locking wrench.
  • Fork spanner SW 13 mm.


Suitable for residential and commercial settings, including:

  • Shopping centres.
  • Airports.
  • Hotels.
  • Restaurants.
  • Banks.
  • Care homes.

General information

Uniclass 2015

Pr_30_36_36_23 Door track and running gearPrimary


P21/10 Quantities and locations

P21/350 Door track and running gear

Specification data - Door track and running gear

Product Reference

Hawa Centerfold 80 H (19535)

Basic set with pivot bearing, without guide.

Hawa Centerfold 80 H (19536)

Additional set without guide.

Hawa Centerfold 80 H (19619)

Pivot door set for installation without bottom guide channel.

Hawa Centerfold 80 H (19620)

Pivot door set to folded stack (without trolley and top pivot bearing).

Installation/ Design

As drawing

Insert requirements, various possibilities available. Consult manufacturer for details.

Running track

6000 mm

Cut to size

Insert requirements.


Insert quantity. See 'Options' for details.

Hollow seals

Insert quantity. Provided in rolls of 10 m (black, rubber).


Not required

Bar bolt lock

Allows locking of the folding wall at handle height. Square/ hexagonal socket, backset 42.5 mm.


Provides unobtrusive, barely visible locking at the panel bottom edge. Galvanized steel deadbolt, 13 mm.

Accessories/ Other requirements

Not required

Wall attachment

Two configurations available, see 'Options' and insert requirements.

Standard product features


Sliding/ stacking, centre folding

Product Options

Installation/ Design:

One-sided installations filling an aperture up to 6000 mm width are possible using the one-panel basic sets, supplementary and pivot door sets – or double this figure for two-sided installations. Consult manufacturer for further details.

Running track:

Aluminium, plain anodized, pre-drilled.


  • Stainless steel grade 316 (1.4401) with heavy load bearings and fixing screws.
  • Panels up to 2500 mm tall require two hinges.
  • Panels up to 3500 mm tall require three hinges.


  • Additional deadbolt or bar bolt locks may be fitted for safety and to keep out unwanted visitors.
  • Both locks engage with floor inserts, or a locking plate.
  • Locking from the inside engages the floor-mounted sleeve (13787).
  • Mortice locks can be used to secure pivot doors (supplied by others).

Various locking positions and accessories are available including thumbturns and deadbolt lock keys, consult manufacturer for details.

Accessories/ Other requirements:

- Wall attachment:

  • Version A: With premises-fitted compensation strip and hollow seal (19657).
  • Version B: Direct wall attachment, requires 6 mm clearance.

Other accessories and spares are also available, consult manufacturer for details.

Similar products from Hawa Sliding Solutions AG