NBS Source
I'm a manufacturer

Application

  • For use on bare or corroded ferrous metal substrates and provides a stable surface for overcoating using most paint systems.
  • Interior or exterior application.
  • Not suitable for temperatures above 80°C, for immersion or for surfaces in contact with potable water or foodstuffs.

Description

An anti-corrosive primer that provides a high build finish to heavily pitted areas of rust, smooths rough surfaces and creates a barrier inhibiting the formation of further rust.


Features and benefits:

  • Anti-corrosive primer for ferrous metals.
  • Compatible with most topcoats.
  • Can be applied direct to rust.
  • Stabilizes rust.


Available in Beige, Dark Brown and Grey.

Packsizes: 250ml, 2.5L, and 400ml (aerosol)


Execution

  • Apply two coats, allowing six hours between coats. For best results allow 24 hours.

General information

Finish

Matt

Material

Other

Shape

Formless

Uniclass

Pr_35_31_66_81 Solvent-borne metal primersPrimary
Pr_35_31_66_68 Primer-undercoats

CAWS

M60/130 Gloss paint

M60/175 Protective coating

M60/150 Eggshell/ satin paint

M60/195 Special coating

M60/14 Eggshell/ satin paint

M60/18 Special coating

M60/12 Gloss paint

Specification data - Solvent-borne metal primers

Composition

Manufacturer's standard.

Execution

Brush application.

Guidance for specification option:

Apply two coats, allowing six hours between coats. Ensure corners and edges are well covered. Apply topcoat after six hours.

Roller application

Guidance for specification option:

Apply two thick coats. Thin with Hammerite Brush Cleaner & Thinners at nine parts paint to one part thinners. Brush in edges first before using roller. A suitable Hammerite topcoat/ paint system must be applied after a minimum of six hours. For best results allow 24 hours.

Manufacturer guidance

Consult manufacturer's literature.


  • Remove loose rust, scale and paint by wire brushing or rubbing down with coarse abrasive paper.
  • Abrade clean steel with emery paper to provide a key.
  • Degrease where necessary with white spirit, rinse with clean water and allow time to dry.
  • Ideal application temperature is 8–25°C.
  • Stir paint thoroughly before use.

Product Reference

No1 Rust Beater

Colour

Beige.

Dark brown.

Format

Aerosol.

Can.

Contractor's choice.

Coverage

Aerosol: 1 m² per 200 ml can.

Brush (one coat): 12 m²/L.

Sustainability data

Recyclability

-

Manufacturer guidance

Can only.

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

Similar products from Hammerite, brand of ICI Paints/AkzoNobel

Hammerite Red Oxide Primer

Hammerite Red Oxide Primer