NBS Source
List your products

This product is no longer available

Description

A lightweight, non-loadbearing wall system designed for forming curved walls and linings. The boards do not require pre-wetting, and there is no requirement for curved timber templates.

Concave and convex curves can be formed, with radii down to 600 mm. The boards can be jointed or skimmed in the normal way.

The system comprises of one layer of Gyproc or Glasroc board, screw fixed each side of 70 mm wide light gauge metal framework, incorporating CurveLiner floor and ceiling channels.

Minimum radii:

– Glasroc F MultiBoard:

  • 6 mm: 600 mm.
  • 10 mm: 2500 mm.
  • 12 mm (2 x 6 mm): 600 mm.
  • 12.5 mm: 2700 mm

– Gyproc WallBoard:

  • 9.5 mm: 1800 mm.
  • 12.5 mm: 3600 mm.
  • 15 mm: 4800 mm.

– Gyproc FireLine:

  • 12.5 mm: 4800 mm.
  • 15 mm: 5700 mm.

– Gyproc SoundBloc:

  • 12.5 mm: 2900 mm.
  • 15 mm: 3600 mm.

Limitations:

  • Not suitable for use in areas subjected to continuous damp or humid conditions. Specify MR (moisture resistant) boards in intermittent wet areas.
  • Not recommended for industrial use.

General information
Specification data - Gypsum board partition systems
Product Reference

GypWall Curved

Studs -
Type

70 mm Gypframe 70 S 50 'C' studs

70 mm Gypframe 70 S 60 'C' studs

70 mm Gypframe 70 I 70 'I' studs

Centres

300 mm

400 mm

Head condition -
Type

Gypframe 72 EDCL 80 CurveLiner Channels, fixed to ___

Insert e.g. 'underside of ceiling joists'.

Linings

1 x 12.5 mm Gyproc FireLine to each side

1 x 15 mm Gyproc FireLine to each side

1 x 12.5 mm Gyproc FireLine MR to each side – tapered edge

1 x 15 mm Gyproc FireLine MR to each side – tapered edge

1 x 12.5 mm Gyproc Moisture Resistant to each side

1 x 15mm Gyproc Moisture Resistant to each side

1 x 6 mm Glasroc F MultiBoard to each side square edged

2 x 6 mm Glasroc F MultiBoard to each side – square edged

1 x 10 mm Glasroc F MultiBoard to each side – square edged

1 x 12.5 mm Glasroc F MultiBoard to each side – square edged

1 x 12.5 mm Gyproc SoundBloc to each side – tapered edge

1 x 15 mm Gyproc SoundBloc to each side – tapered edge

1 x 12.5 mm Gyproc SoundBloc MR to each side – tapered edge

1 x 15 mm Gyproc SoundBloc MR to each side – tapered edge

1 x 9.5 mm Gyproc WallBoard to each side

1 x 12.5 mm Gyproc WallBoard to each side

1 x 15 mm Gyproc WallBoard to each side

Edge

Not applicable

Square edged

Tapered edge

Finishing -
Type

Taped seamless finish

Skim coat plaster finish

Not suitable for use with Gyproc Moisture Resistant grade.

To receive ceramic tiles

Primer/ Sealer

One coat of Gyproc Drywall Prime

Two coats of Gyproc Drywall Sealer

For use where vapour control is a consideration.

Accessories

Rigid beads/ stops

Product Options

Deflection allowance:

Consult British Gypsum technical literature for recommendations

Lining:

Where moisture resistant boards are required on one side of the partition only, amend the lining description accordingly.

Edge:

  • Glasroc F MultiBoard available square edged only.
  • Gyproc SoundBloc available tapered edge only.
  • All other boards available squared edged or tapered edge.