This site uses cookies to store information on your computer. Learn more about these cookies, and how to opt out of them. Find out more

NBS Source

Gutterseal

Verified by manufacturer 5 months ago

Liquasil Ltd

Liquid gutter liner system forms a complete fully bonded, seamless and highly flexible lining and gutter repair system that will eliminate leaks in metal, concrete and asbestos cement gutters.

Jump to:
+44 (0)1217 095352 www.liquasil.com

Application

Suitable for asbestos cement, concrete and metal gutters.


Installation Process - metal gutters


  1. Thoroughly clean the gutter and remove excess water
  2. Remove any previous coatings / patch repairs
  3. Apply SWT Primer to entire surface at wet film weight of 125 microns and allow to dry
  4. Apply Non-Sag Sealer to all joints and fixings. Surfaces must be bone dry
  5. Apply Liquasil One at wet film weight of 750-1000 microns throughout gutter, including upstands
  6. Minor repairs can be completed using optional polyester fleece embedded into Non-Sag Sealer.


Installation Process - asbestos or concrete gutters


  1. Thoroughly clean the gutter and remove excess water
  2. Remove any previous coatings / patch repairs
  3. Apply SWT Primer to metal fixings (and optionally entire surface) at wet film weight of 125 microns and allow to dry
  4. Apply Non-Sag Sealer to all joints and fixings. Surfaces must be bone dry
  5. Apply Liquasil One at wet film weight of 750-1000 microns throughout gutter, including upstands
  6. Minor repairs can be completed using optional polyester fleece which is embedded into Non-Sag Sealer.


Method of application - use sacrificial brushes or rollers.

Description

Liquid gutter liner system forms a complete fully bonded, seamless and highly flexible lining and gutter repair system that will eliminate leaks in metal, concrete and asbestos cement gutters.


Features and benefits:

  • Seamless and highly flexible.
  • Will eliminate leaks at their source, without the need to remove any fixings or replace rotted seals.
  • Bonds directly to the substrate.
  • Dries in a few hours.
  • Will not lift, crease, crack, peel or deteriorate.
  • Can be applied by brush or roller.
  • 15-year product-only warranty as standard.
  • Manufactured in accordance with BS 476: Part 3: 1958, BS 6920: 'Water Quality', and DIN EN ISO 7783-2.

Components (in order of application):

  • SWT Corrosion Primer: Two-part epoxy comprising the primer (part A) and the hardener (part B). Rust and wet tolerant for application to all metal surfaces and fixings such as hook bolts to prevent rust from breaking through the coating.
  • Non-Sag Sealer: A specially formulated silicone paste that is brush applied to all metal components and joints.
  • Liquasil One: Gutter lining.


Brushes and rollers are sacrificial.


Surface preparation:

  • Asbestos gutters: Thoroughly clean the gutter, removing all fungal growth and allow to dry completely.
  • Metal gutters: Thoroughly clean the gutter removing heavy rust, debris and fungal growth.


Previous, unstable finishes must be removed prior to application. Surfaces must be completely dry prior to application of Non-Sag Sealer and Liquasil One.



General information

Color

Grey

Finish

Semi-gloss

Material

Silicone

WarrantyDescription

15 year

Product-only warranty: 15 years. Insurance options available up to 12 years.

Uniclass

Pr_65_50_35_38 Gutter liningsPrimary

CAWS

J31/110 Cold deck roof coating

J31/353 Waterproof coating

J31/5 Cold deck roof coating

Product range

Pitched Roof Waterproofing

Specification data - Gutter linings

Material

Silicone polymer.

Primer

SWT Corrosion Primer.

Technical characteristics:  

  • Colour: Grey.
  • Solids content: 100%.
  • Recommended film thickness: 100 μm.
  • Coverage: Up to 6 m²/kg. The presence of heavy rust or use on cast iron will reduce the coverage rate.
  • Drying time: 6–24 hours.
  • Weight: 1 kg/L.
  • Flash point: >100°C.
  • VOC content: 0 g.
  • Finish: Semi-gloss.
  • Application temperature: -20°C to 40°C

Top coat

Liquasil One.

Technical characteristics:  

  • Composition: Liquid.
  • Odour: Slight.
  • Density: 1.2 (at 20°C).
  • Viscosity: <300 P (at 20°C).
  • Solids content: 100%.
  • Recommended film thickness: 1 mm.
  • Coverage: 1–1.25 m²/L.
  • Drying time: Should be rain free for 2–3 hours. Thoroughly dry after 16 hours.
  • Weight: 0.98 kg/L.
  • Flash point: >32°C.
  • VOC content: 0 g.
  • Finish: Semi-gloss.
  • Application temperature: -5°C to 60°C.

Environmental information

Contains Red List materials

No

Country of product manufacture

United Kingdom

Recyclability

Not Recyclable

Recycled content

0 %

Literature

Liquid Gutter Liner. Gutterseal seamless gutter lining.

Liquid Gutter Liner. Gutterseal seamless gutter lining.