NBS Source
List your products
Description

Entrance gates are designed to combine smooth function and sophisticated appearance with security in settings where design is important. Entrance gates are completely silent and provide easy passage and high through-put. Designed to reduce the barrier effect and create a welcome atmosphere, visitors can immediately see how and where they should enter.

A standard GlasStile S consists of a grained or polished stainless steel column with one glass leaf.

A wide selection of glass dimensions and styles is available to create a two-leaf passage or match with the design of the SpeedStile product range.

On receiving a signal from the access control system or push button, the unit will unlock and drive through 90° away from signal direction. Should the glass leaf meet any resistance it will stop and nudge forward. If obstruction continues the unit will alarm and free wheel; an auto reset will re-establish control.

General information
Color

Grey

Features

Rotor Column with Glass Leaf and Width Selection, Card Reader Integration, Push Button Control. remote console, Hand Held Programmer, Push Bar, Remote control system

Finish

Full Stainless Steel 304 Grade / 10 mm 3 ply laminate safety glass

Material

Stainless Steel / Glass Finish

Shape

Cylindrical

Size

900 x 550 mm

900 x 800 mm

900 x 650 mm

900 x 700 mm

900 x 850 mm

900 x 750 mm

900 x 900 mm

900 x 600 mm

900 x 1025 mm

900 x 1000 mm

900 x 950 mm

Uniclass 2015 Stainless steel half-height turnstiles (Pr_30_59_34_88)
Specification data
Product Reference

GlasStile S

Configuration

Single

Tandem pair

Rotor column -
Cladding and casework

Grained stainless steel

As standard.

Polished stainless steel

Height

950 mm

1000 mm

Leaf

Glass leaf

As standard.

Stainless Steel ‘P’ leaf open design

Stainless Steel ‘P’ leaf with infill bars

Glass leaf height

901 mm

As standard.

1200 mm

1800 mm

Glass leaf width (see below for guidance)

400 mm

425 mm

450 mm

475 mm

500 mm

550 mm

600 mm

650 mm

700 mm

750 mm

800 mm

850 mm

900 mm

950 mm

975 mm

Accessories

None

Backup battery

Pedestal complete with provision for card reader

Pedestal complete with push button/ pad

Push bar

Remote double push button console (normally open contacts)

MP Touch

Remote control unit for multiple lane control.

Hand held programmer

Standard product features

Glass leaf:

- Widths:

  • For the 950 mm rotor column (standard height) and the 1000 mm rotor column, all widths are available from 500–975 mm.
  • For the 950 mm rotor column (1200 mm high), all widths are available from 400–900 mm excluding the 425 and 475 mm options.
  • For the 950 mm rotor column (1800 mm high), all widths are available from 400–475 mm.
  • Please note, clear opening width = glass leaf width + 50 mm.

- Height:

Options shown are for 950 mm high rotor column only.

Power Supply:

230 Volts AC 50/ 60 Hz.

Power failure:

In the event of an emergency or isolation of power supply, unit will failsafe i.e. rotor would freely turn in both directions.

Material:

  • Rotor column: 220 mm diameter 304 grade grained stainless steel (BS EN 10088-2 Grade 1J/2J).
  • Glass leaf: 10 mm thick clear toughened frameless glass panel giving a maximum 1025 mm clear opening.

Product Options

Accessories:

  • Backup battery: Maintains all 24 V control facilities for 500 operations or four hours.
  • Pedestal c/w provision for card reader or push button/ pad: Where the card reader or push button/ pad for the entrance gate is not incorporated into adjacent entrance control products, then a pedestal needs to be provided. The card reader will generally be part of the access control package. Check with Gunnebo UK Ltd Sales Executives for advice on the size, location and suitability of the reader.
  • Push bar: Affixed to the top of each glass wing to match casework choice.
  • Remote push button console: Double push button with hold open key switch override mounted in a 200 x 120 x 75 mm stainless steel enclosure with timber ends.
  • Remote control unit for multiple lane control: MP Touch is a full colour touch screen control unit consisting of panel switches which can change the operation mode of the entrance control products connected to it. It can control up to a maximum of 30 gates or lanes.
  • Hand held programmer: One required per site to set up the GlasStile S.

Digital objects
PlatformCompatibleVersionCertified to
Revit
Revit 2014 1 1.2
Download now from NBS National BIM Library
Literature
Similar products from Gunnebo UK Ltd