NBS Source
List your products

This product is no longer available

Application

For the gluing of solid surface materials onto an acrylic resin basis. Limited suitability for the gluing of solid surfaces with wood based materials.

Cannot be diluted. The surfaces to be bonded must be clean, dry and free of grease.

Available in 50 ml and 250 ml cartridges. Includes two mixing nozzles (additional nozzles are necessary when using the same cartridge more than twice). Consult manufacturer's literature for details.

Description

Two-component, acrylic glue/ joint adhesive.

Features and benefits:

  • For one-side bonding.
  • Will take approximately 45 minutes to harden at room temperature; the hardening process can be accelerated by increasing the temperature.
  • To be processed with a static mixer.

Applications:

For the gluing of solid surface materials onto an acrylic resin basis. Limited suitability for the gluing of solid surfaces with wood based materials.

Cannot be diluted. The surfaces to be bonded must be clean, dry and free of grease.

Available in 50 ml and 250 ml cartridges. Includes two mixing nozzles (additional nozzles are necessary when using the same cartridge more than twice). Consult manufacturer's literature for details.

General information
Specification data
Product Reference

GetaCore® Acrylic Joining Adhesive

Standard product features

Form:

Pasty.

Technical characteristics:

– Component A (resin):

  • Density: 1 g/cm³.
  • Mixing ratio: 10.
  • Viscosity (at 20° C): 20–25 MPa.

– Component B (hardener):

  • Colour: Transparent/ opaque white.
  • Density: 1.1 g/cm³.
  • Mixing ratio: 1.
  • Viscosity (at 20° C): 16 MPa.

– Finished product (mixture of components):

  • Viscosity (at 20° C): 50 MPa.
  • Processing duration (at 20° C): 15 minutes.
  • Consistency of the adhesive joint: ≥35 N/mm² (WN-304).