Gate Pier
Cast stone gate pier.
Cast stone gate pier available with various heights according to the number of centre shaft units used. Each course will be supplied in two halves. Both halves need to be ordered. Custom-made products are available on request.
If the gate piers are to be infilled with concrete the shaft sections should be lined with 25 mm polystyrene (Styrofoam) or similar to act as an isolating medium. Consult technical literature for further details.
Components:
- S120C Pier Cap.
- S120D (Top of shaft).
- S120E (Mid shaft).
- S120F (Bottom of shaft).
- S120G Base.
Material:
- Haddonstone (Semi-dry cast limestone):
High quality semi-dry cast stone, consisting of over 50% limestone aggregate. With a surface texture similar to Portland Stone, Haddonstone is regularly used alongside or as an alternative to natural stone.
- TecStone (wet cast limestone):
High quality wet cast stone, comprising over 60% natural limestone aggregate. Denser than the Haddonstone material, TecStone is acid etched as standard to provide an attractive appearance similar to a finished natural stone. Designed to meet demanding performance criteria and can incorporate structural reinforcement and cast-in fixings. TecStone is the preferred material for architectural projects where structural performance is required.
Material | Haddonstone (semi-dry cast limestone) TecStone (wet cast limestone) |
Uniclass 2015 | |
CAWS | F22/110 Cast stone |
Product Reference | Gate Pier |
Type | Bespoke Gate PierConsult manufacturer for details and insert requirements. Gate Pier S120 (complete, S120D, E and F Both halves) |
Material | Haddonstone (semi-dry cast limestone)TecStone (wet cast limestone) |
Colour | Bath 02Ivory Limestone ILPortland 01BespokeInsert requirement for colour. |
Accessories | NoneCast-in fixingsInsert requirements for cast fixings. Cast-in lifting socketsInsert requirements for lifting sockets. |
Standard product features | Size (excluding joints):
Weight:
Compressive cube strength after 28 days (minimum):
Both materials exceed the requirements of the United Kingdom Cast Stone Association (UKCSA) specification and comply with the requirements of BS 1217, BS 5642-2+ A1 and BS EN 13198. Haddonstone:
TecStone:
|